two facile and low cost routes were used for the synthesis of if-ws2 nanoparticles. in this paper, preparation of if-ws2 nanoparticles with two different methods was investigated. in the first method, wo3 nanoparticles were reacted with h2s gas in n2/h2 reducing atmosphere at 900 oc. the as-synthesized if-ws2 nanoparticles are spherical shape with an average size of about 70 nm.  in the second ...

the cunica nanopanicles have been synthesized by sol-gel auto-combusson. microwave and co-precipitationtechniques. then, the results of the three techniques were compared. in the vol-ael auto-combustion synthesiswas used glycine as a fuel. at first, sol was prepared. then, gel was achieved from drying so'. the prepared gelwas burnt at 350°c. in the noicrowavc technique, gel was prepared. then, ...

nanocrystalline complex oxides have been synthesized by combination of sol–gel auto combustion and ultrasonic irradiation techniques using copper nitrate, zinc nitrate as metallic nitrates and glycine, urea and thiourea as fuels. sol-gel combustion (combination of the chemical sol–gel process and the combustion process) as a proper synthesized technique is used to synthesize zno/cuo nanocomposi...

Advanced combustion modes such as Controlled Auto-Ignition or Homogeneous Charge Compression Ignition have been under much attention due to their ability to reduce both emissions and fuel consumption. Thus, this paper aims at demonstrating the achievement of Controlled Auto-Ignition combustion on a standard 4-cylinder gasoline engine with negative valve overlap (NVO) and analyzing its performan...

nanocrystalline zro2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. the overall process involved three steps: formation of homogeneous sol at 50-55°c; formation of dried gel at 110°c, and combustion of the dried gel at 400°c. experiments revealed that zro2 dried gel derived from glycine (fuel) and nitrate sol exhibited self propagating combustion a...

This article makes the argument that compression ignition combustion processes that are “flameless” with volumetric energy release, described as Low Temperature Combustion (LTC), are a thermodynamic pathway to maximizing the efficiency of reciprocating piston, internal combustion engines. The argument is built from the foundation of determining the maximum theoretical efficiency for an IC Engin...

nanocrystalline particles of barium hexaferrite has been prepared by the sol–gel auto- combustion method using iron and barium nitrate with a ba:fe molar ratio of 1:10. the effect of fuel such as citric acid and aspartic acid was investigated on the structure and magnetic properties of nanoparticles. the results revealed that the formation of barium hexaferritefine particles is influenced by mo...

Nanocrystalline ZrO2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. The overall process involved three steps: formation of homogeneous sol at 50-55°C; formation of dried gel at 110°C, and combustion of the dried gel at 400°C. Experiments revealed that ZrO2 dried gel derived from glycine (Fuel) and nitrate sol exhibited self pr...

Combustion in homogeneous charge compression ignition (HCCI) engine is controlled auto ignition of well-mixed fuel, air and residual gas. Since onset of HCCI combustion depends on the auto ignition of fuel/air mixture, there is no direct control on the start of combustion process. Therefore, HCCI combustion becomes unstable rather easily especially at lower and higher engine load. Charge strati...

sol–gel auto-combustion is a unique combination of the combustion and the chemical gelation processes. in this work, nanosize (d) powders with compositions of znfe2o4 were synthesized by sol–gel combustion method. the puffy, porous brown powders as-combusted was calcined at the temperature of 750–1000◦c for 4 h. these powders are characterized by x-ray diffraction and scanning electron microsco...