The effects of ball milling parameters, namely, the ball-to-powder mass ratio and milling speed, on the synthesis of (K0.5Na0.5)NbO3 nanopowders by high-energy ball milling method from a stoichiometric mixture containing Na2CO3, K2CO3, and Nb2O5 were investigated in this paper. The results indicated that the single crystalline phase of (K0.5Na0.5)NbO3 was received in as-milled samples synthesiz...

Thermo-gravimetric analyses of three cellulosic substances, namely, microcrystalline and amorphous cellulose, and treated Japanese cypress (JC) sawdust were carried out in this study. The thermal degradation temperature of crystalline cellulose decreased with increasing ball-milling time, while that of amorphous cellulose barely changed. However, small differences in the derivative thermo-gravi...

LiAlH4 and CaCl2 were employed for mechano-chemical activation synthesis (MCAS) of Ca(AlH4)2 and LiCl hydride composite. After short ball milling time, their X-ray diffraction (XRD) peaks are clearly observed. After ball milling for a longer duration than 0.5 h, the CaAlH5 diffraction peaks are observed which indicates that Ca(AlH4)2 starts decomposing during ball milling into CaAlH5+Al+1.5H2. ...

This research is about manufacture nanopowder Bioceramics from local materials used Ball Milling for biomedical applications. Source materials for the manufacture of medicines are plants, animal tissues, microbial structures and engineering biomaterial. The form of raw material medicines is a powder before mixed. In the case of medicines, research is to find sources of biomedical materials that...

effective methodologies for efficient preparation of semicarbazones from aldehydes or ketones via milling and the subsequent regeneration of the parent carbonyls by gaseous nitrogen dioxide are described under solid-solid and gas-solid reaction conditions, respectively. these methods are fast, simple and environmentally benign which do not require the use of any auxiliaries such as catalysts or...

For time and cost saving reasons, the lowest surface roughness possible is sought in milling operations. High speed milling is recommended in order to minimise the amount of material to be removed in subsequent finishing operations, e.g. grinding, electrical discharge machining or manual polishing. Several roughness parameters are usually employed for the characterization of polished surfaces. ...

Mechanical alloying has recently attracted considerable attention as researchers strive to enhance nanocomposite properties and extend their utility. The process can be performed at room temperature and homogeneous nanocomposite powders can be produced. In this paper, we investigated the effect of different ball milling parameters and operating conditions (milling time, ball size, processing co...

the molybdenum dicilicide is an intermetallic compound with two allotropies tetragonal ?-mosi2 and hexagonal ?-mosi2.the ?-mosi2 phase is established to 1900 ?c and ?-mosi2 phase from 1900 to 2050 ?c. this material has considerable properties that provide different applications in different industries such as air-space industry and gas turbines. the molybdenum synthesis can be down in various w...

The Class F fly ash has been subjected to high energy ball milling and has been converted into nanostructured material. The nano structured fly ash has been characterized for its particle size by using particle size analyzer, specific surface area with the help of BET surface area apparatus, structure by X-ray diffraction studies and FTIR, SEM and TEM have been used to study particle aggregatio...

The effect of milling time on the morphology, microstructure, physical and mechanical properties of pure Al-5 wt % Al₂O₃ (Al-5Al₂O₃) has been investigated. Al-5Al₂O₃ nanocomposites were fabricated using ball milling in a powder metallurgy route. The increase in the milling time resulted in the homogenous dispersion of 5 wt % Al₂O₃ nanoparticles, the reduction of particle clustering, and the red...