Biomass co-firing is becoming a promising solution to reduce CO2 emissions, due to its renewability and carbon neutrality. Biomass normally has high moisture and volatile contents, complicating its combustion behavior, which is significantly different from that of coal. A computational fluid dynamics (CFD) combustion model of a single biomass particle is employed to study high-temperature rapid...

To realize large-percentage biomass co-firing with coal in existing coal-fired boilers, the combustion behavior of biomass is expected to be similar or comparable to that of coal. When co-firing with coal, biomass is not necessarily to be ground as fine as the dedicated coal particles, because of its higher reactivity. With the objective of achieving promising performance of co-firing with dedi...

Economic processing of lignocellulosic biomass requires handling the biomass at high solids concentration. This creates challenges because concentrated biomass behaves as a Bingham-like material with large yield stresses. Here we employ torque rheometry to measure the rheological properties of concentrated lignocellulosic biomass (corn stover). Yield stresses obtained using torque rheometry agr...

The wood biomass was liquefied by the pressurized hydrothermal method. The wood biomass powder in the different particle size, which was pulverized by a vibration mill, cutter mill and grinder, was used for the liquefaction. The liquefaction material was biomass slurry, which was prepared by mixing the wood biomass powder and water together (1:9). After filling the biomass slurry in a pressure ...

BACKGROUND Steam explosion pretreatment has been examined in many studies for enhancing the enzymatic digestibility of lignocellulosic biomass and is currently the most common pretreatment method in commercial biorefineries. The information available about the effect of the explosive decompression on the biochemical conversion is, however, very limited, and no studies prove that the latter is a...

This study examines the morphological properties of freshly emitted and atmospherically aged aerosols from biomass burning. The impacts of particle morphology assumptions on hygroscopic predictions are examined. Chamber experiments were conducted at the University of California, Riverside, Center for Environmental Research and Technology (CE-CERT) atmospheric processes lab using two biomass fue...

In this study, the bio-reduction of Au(III) to Au(0) by wheat biomass and the subsequent production of gold nanoparticles of various shapes and sizes is presented. The dry biomass was ground and sieved to 100 mesh in order to assure a uniform particle size and having more area of biomass exposed to the gold. Wheat biomass was exposed to a 0.3mM potassium tetrachloroaurate solution at pH values ...

~ Author for correspondence; [email protected] A numerical study is performed in order to evaluate the performance and optimal operating conditions of vofiex pyrolysis reactors used for condensable tar production from biomass. A detailed mathematical model of porous biomass particle pyrolysis is coupled with a compressible Reynolds stress transport model for the twbulent reactor swirling flow....

Results from mathematical modeling of aerosol formation during combustion of woody biomass fuels were compared with results from particle size distribution (PSD) measurements at a pilotscale biomass combustion unit with moving grate and flame tube boiler. The mathematical model is a plug flow model considering coagulation, nucleation, condensation, and particle deposition mechanisms (thermophor...

Cellulosic ethanol produced from cellulosic biomass is an alternative to petroleum-based transportation fuels. Raw cellulosic biomass has low density, causing high costs in their storage, transportation, and handling. Ultrasonic vibration-assisted (UV-A) pelleting can increase the density of cellulosic biomass. Effects of UV-A pelleting variables on pellet quality (density, durability, stabilit...