A quasi one-dimensional analysis of a STOVL aircraft nozzle in hover is performed to estimate the gross thrust coefficient as a function of nozzle pressure and nozzle area ratios. The analysis is supported by subscale, cold flow test results. The nozzle performance was found to be less than desirable in hover due to the overexpansion arising from the geometrical constraints of the existing nozzle.

High-efficiency rock breaking by hydraulic jetting is the key to radial horizontal drilling technology. In order improve efficiency of jet in wells, based on LS-Dyna display dynamics, a numerical simulation model single-nozzle was established analyze influence different nozzle parameters rock-breaking effect. Then, spin multi-nozzle bit established, and rotation speeds effect analyzed. Finally,...

The airframe-integrated linear-spike nozzle concept applied to an external nozzle for high-speed aircraft was evaluated with regard to the thrust augmentation capability and the trim balance. The main focus was on the vehicle aftbody. The baseline airframe geometry was first premised to be a hypersonic waverider design. The baseline aftbody case had an external nozzle comprised of a simple dive...

A multiaxis thrust-vectoring nozzle designed to have equal ow-turning capability in pitch and yaw was conceived and experimentally tested for internal static performance at Langley Research Center. The cruciform-shaped, convergent-divergent nozzle turned the ow for thrust vectoring by deeecting the divergent surfaces of the nozzle, called aps. Methods for eliminating physical interference betwe...

A m ultiaxis thrust-vectoring nozzle designed to have equal ow-turning capability in pitch and yaw was conceived and experimentally tested for internal static performance at Langley Research Center. The cruciform-shaped, convergent-divergent nozzle turned the ow for thrust vectoring by deeecting the divergent surfaces of the nozzle, called aps. Methods for eliminating physical interference betw...

Abstract:-The FSAE guidelines state that it is mandatory for each and every car participating in the said event to have a single circular 20mm restrictor in the intake system. All the air flowing to the engine must pass through this restrictor. Conventionally, a Venturi Nozzle is used as a restrictor. In our research, we have proposed two Nozzles: De-Laval Nozzle and Bell Nozzle as an alternati...

Lateral nozzle forces are known to cause severe structural damage to any new rocket engine in development. Currently there is no fully coupled computational tool to analyze this fluid/structure interaction process. The objective of this study was to develop a fully coupled aeroelastic modeling capability to describe the fluid/structure interaction process during the transient nozzle operations....

Cavitation and turbulence in a diesel injector nozzle has a great effect on the development and primary breakup of spray. However, the mechanism of the cavitation flow inside the nozzle and its influence on spray characteristics have not been clearly known yet because of the internal nozzle flow complexities. In this paper, a comprehensive numerical simulation is carried out to study the intern...

DLR Lampoldshausen carried out cold flow tests to study the flow field in a truncated ideal contour nozzle at low nozzle pressure ratios. A convex shaped Mach disk was found for nozzle pressure ratios less than 10 and a slight concave one for nozzle pressure ratios more than 20. Due to boundary layer transition the convex Mach disk is temporary tilted and redirects the flow towards the nozzle w...