At the initial phase of the mechanical product development, it is very important to effectively obtain the modal damping ratio of the bolted joint structure for accurately predicting dynamic response. The energy dissipation has been estimated using a finite element model incorporating the effect of pretension force of the bolted joint. First, the modal damping ratios of the first four modes are...

Online and offline monitoring of composite bolted joints under tensile load were investigated using piezoelectric transducers. The relationships between Lamb wave signals, pre-tightening force, the applied tensile load, as well as the failure modes were investigated. Results indicated that S0/A0 wave amplitudes decrease with the increasing of load. Relationships between damage features and S0/A...

In this study, analytical models considering different material and geometry for ‎both single and double-lap bolted joints were reviewed for better understand how to ‎select the proper model for a particular application. The survey indicades that the ‎analytic models selected for the adhesively single or double bolted lap joints, as well ‎as T, scarf, and stepped joints, with linear material pr...

all organ systems may be affected by tuberculosis (tb) but tuberculosis arthritis is responsible for approximately 1% of tb patients. weight bearing joints such as hips and knees are most commonly affected; whereas involvement of sternoclavicular joint with tuberculosis is a very rare disease. in this case report we present a 63-year old woman with tuberculosis of the sternoclavicular joint. he...

this paper presents the results of the assembly process of a gasketed bolted flanged pipe joint for two different bolt tightening strategies, i.e. asme and industrial using torque control of preload method.  the final clamping force is achieved in four and five passes in asme and industrial strategy respectively. axial bolt stress variation, at the end of each pass, individual bolt bending beha...

In the presented research, a split Hopkinson tension bar (SHTB) was used to measure mechanical response of multi-material single-lap joints in high-rate loading regime. High-performance applications require high-quality measurements properties define safe design rules. Servo-hydraulic machines are commonly investigate such small structures, but they prone produce oscillation-affected force meas...

Bolted joints are widely used in industrial rotating machines to fasten the adjacent disks together and affect system dynamic properties. Therefore, there is a strong need study their influence on response of such systems. This paper investigated effect eccentric phase difference disk bolted-disk joint rotor dynamics, which takes into account time-varying bending stiffness bolted joint. The mod...

In this research, the effects of torque tightening on the stress distribution in double lap simple bolted and hybrid (bolted-bonded) joints have been investigated numerically. In order to determine the bolt clamping force value due to tightening torque in simple bolted and hybrid joints, which is necessary in numerical simulation, an experimental approach has been proposed. To do so, two kinds ...

This paper aims to study the mechanical behaviour and failure mode of Al 2024-T3 in double-lap bolted joints. To accomplish this, the effect of geometric parameters was investigated in both configurations of single and double fasteners. Using ABAQUS/Standard, a three-dimensional finite element model was developed and verified against the experimental results of the joints loaded in tension. In ...

The use of self-tapping screws with continuous threads in the joint area as a reinforcement to avoid splitting of timber members is studied. A theoretical model is developed to calculate the stress distribution around a pin-loaded hole in a timber joint, to predict brittle failure modes in bolted connections and to calculate the load in the reinforcing screws. Laboratory experiments on reinforc...