Abstract: Masonry infill is considered as a non-structural element in all type of buildings where masonry use. But, masonry infill walls are mainly used to increase initial stiffness and strength of reinforced concrete (RC) frame buildings. This Open First storey is also termed as “Soft Storey”. The upper storeys have brick infilled wall panels with various opening percentage in it. In many cit...

pullback test has no scrupulous theoretical establishment. it is based on the hypothesis that the response ofthe structure can be related to the response of an equivalent single degree-of-freedom (sdof) system. this implies thatthe response is controlled by a single mode. in fact, the steel frame of each safe room, which is introduced within theunreinforced masonry buildings for protecting the ...

Recycled concrete brick (RCB) is manufactured by recycled aggregate processed from discarded concrete blocks arising from the demolishing of existing buildings. This paper presents research on the seismic performance of RCB masonry walls to assess the applicability of RCB for use in rural low-rise constructions. The seismic performance of a masonry wall is closely related to the vertical load a...

By Timothy Phillips Vaughan, MS. Washington State University May 2010 Chair: David I. McLean This research evaluated the structural performance of reinforced masonry shear walls conforming to requirements given in the 2008 MSJC Building Code Requirements for Masonry Structures under cyclic lateral loading. Seismic design provisions in the 2008 MSJC provide prescriptive requirements for three di...

The over-strength coefficient is one of the key factors for seismic safety a structure. For RC frames, infill wall may improve lateral bearing capacity, while demand increases as well, which leads to unexpected performance an infilled frame in past earthquakes. Therefore, it necessary systematically study effect frames from point capacity and demand. In this paper, 36 structures with/without wa...

This paper presents first a valid, fully non-linear 2-D numerical model that can capture realistically the in-plane hysteretic behaviour of reinforced concrete (R/C) frames with masonry infills when they are subjected to combined vertical and cyclic horizontal loads in order to predict their post-elastic earthquake bahaviour. The effectiveness of this simulation was validated by comparing the n...

This masonry research investigated the differences in the static and dynamic stiffness for the seismic range of loads and frequencies for a pressed clay masonry wythe. The effective stiffness has been defined in Newtonian physics and Damage Mechanics. This research used the concept of measured stiffness defined as the measured stress field divided by the measured strain field. A two-part test r...

Dual systems of steel moment frame and reinforced concrete shear wall have combined the advantages of steel frames and reinforced concrete shear wall. These walls have increased the lateral stiffness of steel frames and have reduced seismic demands on steel frames thus providing opportunities to use such system. In this research intermediate dual system of steel moment frame was chosen with int...

dual systems of steel moment frame and reinforced concrete shear wall have combined the advantages of steel frames and reinforced concrete shear wall. these walls have increased the lateral stiffness of steel frames and have reduced seismic demands on steel frames thus providing opportunities to use such system. in this research intermediate dual system of steel moment frame was chosen with int...

In order to improve the energy dissipation of the masonry infilled frame structure while decreasing the stiffening and strengthening effects of the infill panels, a new dry stacked panel (DSP) semi-interlocking masonry (SIM) infill panel has been developed. In this paper, the material properties of DSP and a traditional unreinforced masonry (URM) panel have been evaluated experimentally. A seri...