نتایج جستجو برای: carbon fiber

تعداد نتایج: 403193  

ژورنال: سلامت کار ایران 2016

Background and aims: Conventional Methods for determination of volatile organic pollutants in the air are based on solvent extraction. Solid-phase microextraction (SPME) has been popular as an environmentally friendly technique to extract a very wide range of analytes. SPME fibers have some drawbacks that can be overcome by use of sol-gel nanosorbents. Therefore the aim of this study has been t...

Journal: :نشریه دانشکده فنی 0
سیامک مطهری

in the present research work, the flexural modulus and strength of glass fiber-epoxy resin and carbon fiber-epoxy resin composites have been enhanced through fiber tension during curing of the polymeric resin. this study showed that the tension applied on the fibers increased the flexural modulus of the glass-epoxy composites up to 12% and the flexural strength up to 19%. the flexural modulus a...

2012
Chang-Hsuan Chiu

This paper demonstrates the feasibility of replacing the metal coil spring with the composite coil spring. Three different types of springs were made using glass fiber, carbon fiber and combination of glass fiber and carbon fiber. The objective of the study is to reduce the weight of the spring. According to the experimental results the spring rate of the carbon fiber spring is 34% more than th...

Carbon fiber composite is one of the most important materials in aerospace engineering applications. For fabrication of this composite, optimum polymerization and carbonization cycles of phenolic resin were obtained [1]. Then, carbon/phenolic composite was fabricated by mixing different weight percentages of T700 carbon fiber with phenolic resin, and the flexural strength of specimens was exami...

Journal: :journal of particle science & technology 2015
karim osouli abbas kianvash aliakbar entezami

radar absorbing materials, i.e. magnetite (fe3o4) coated carbon fibers (mccfs) were fabricated by electro-deposition technique. black-colored single spinel phase fe3o4 nanoparticles was easily synthesized by hydrothermal method using reduction of a fe (iii) - triethanolamine complex in an aqueous alkaline solution at 60-80 ◦c. uniform and compact fe3o4 films were fabricated on nitric acid treat...

Siamak Motahhari

In the present research work, the flexural modulus and strength of glass fiber-epoxy resin and carbon fiber-epoxy resin composites have been enhanced through fiber tension during curing of the polymeric resin. This study showed that the tension applied on the fibers increased the flexural modulus of the glass-epoxy composites up to 12% and the flexural strength up to 19%. The flexural modulus a...

2009
J Li

In this work, ozone modification method and air-oxidation are used for the surface treatment of polyacrylonitrile(PAN)based carbon fiber. The surface characteristics of carbon fibers are characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites are investigated by means of the single fiber pull-out tests. As a ...

Kumar Konada, N., Siva Kumar, S., Suman, K.N.S.,

The ability to absorb vibrations in a vehicle during braking conditions depends primarily on the selection of ingredients for a friction material and interfacial adhesion between all these ingredients.  In this work, a hybrid brake friction material is developed by combination of carbon fiber (CF), glass fiber (GF), resin and other ingredients. The surfaces of carbon and glass fibers are c...

ژورنال: مهندسی دریا 2009
علیمحمدی, کاپیتان مالک, موسوی, سید یحیی, پیرایش‌فر, امیر سهیل,

According to the high demand of fiberglass/polyester composites in marine applications, this paper has studied the properties of these composites. It has also been shown that isophthalic polyester has better properties than orthophthalic polyester, in marine applications. This paper has also investigated the vinyl ester and phenolic resin stability especially in the sea water and has shown that...

Journal: :international journal of civil engineering 0
khalou a.r. department of civil eng., sharif university of technology, tehran, iran ghara chour lou a.

this paper presents the results of analytical studies concerning the flexuralstrengthening of reinforced concrete beams by external bonding of high-strength lightweightcarbon fiber reinforced plastic (cfrp) plates to tension face of the beam. three groups of beamswere tested analytically and compared with existing experimental results. results of the numericalanalyses showed that, although addi...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید