Microbially influenced corrosion (MIC) in oil field pipeline systems can be attributed to many different types of hydrogenotrophic microorganisms including sulfate reducers, methanogens and acetogens. Samples from a low temperature oil reservoir in Nigeria were analyzed using DNA pyrotag sequencing. The microbial community compositions of these samples revealed an abundance of anaerobic methano...

This paper studied effects of ultrasonic treatment during the solidification process on structure formation of low carbon steel. Results showed that with ultrasonic treatment grains were refined and the steel ingot avoided the cast widmanstatten structure. When ultrasonic treatment was employed, pearlite was broken and the average length of pearlite was decreased from 550mm to 140mm. The corres...

Introduction In the 1970s, exterior bonded steel reinforcement was used sporadically to reinforce bridges to attain higher service load capacities. This steel post-strengthening system consisted of steel straps bonded with epoxies to the exterior of concrete beams. An alternative to the steel retrofit is woven carbon fiber reinforced polymer fabric applied in the same manner as steel. Carbon fi...

Medium-carbon steel is commonly used for the rail, wire ropes, tire cord, cold heading, forging steels, cold finished steel bars, machinable steel and so on. Its fatigue behavior analysis and fatigue life estimation play an important role in the machinery industry. In this paper, the estimation of fatigue life of medium-carbon steel with different surface roughness using established S-N and P-S...

The aim of this study was to investigate the effect of inhibition of Marrubium astranicumleaves extract on the corrosion of carbon steel in hydrochloric acid solution by using weightloss and tafel polarization methods. Inhibition was found to increase with increasingconcentration of the leaves extract. The inhibition efficiency of this extract at an optimumconcentration of 100 mg L-1 was 99.9 %...

This paper demonstrates that the addition of chemical agents and carbon fibers to cement can greatly enhance the shielding effectiveness of the concrete. In addition to improving the shielding effectiveness, carbon fibers and chemical agents enhance the tensile and flexural strengths significant ly. As both carbon fibers and steel fibers are electrically conductive, both can be added to cement ...

The failure pressure of pipe with wall-thinning was investigated by using three-dimensional elastic-plastic finite element analyses (FEA). With careful modeling of the pipe and flaw geometry in addition to a proper stress-strain relation of the material, FEA could estimate the precise burst pressure obtained by the tests. FEA was conducted by assuming three kinds of materials: line pipe steel, ...

The inhibitive action of extract of curry leaves (Murraya koenigii) on carbon steel in 1N HCl has been studied using weight loss, gasometric studies and electrochemical polarization and AC impedance measurements. The effect of temperature on the corrosion behaviour of carbon steel in 1N HCl with optimum concentration of inhibitors was studied in the temperature ranging from 30 -80 ̊C. The protec...

The causes and the prevention of carbon steel corrosion in amine systems are reviewed. The corrosive agents are acid gases, oxygen, heat stable salts, amine degradation products, and, in refineries, gas contaminants such as ammonia and hydrogen cyanide. Corrosion mechanisms are provided for carbon steel exposed to amine solutions and for amine regenerator overhead systems containing aqueous con...

The initial material cost of structural stainless steel is about four times that of structural carbon steel, due largely to the expense of the alloying elements and the relatively low volume of production. Given broadly similar structural performance, additional areas of benefit need to be identified and exploited in order to establish stainless steel as a viable alternative material for constr...