In this study, vanadium conversion coating(VCC) was deposited on the surface of soft-cast steel (St-37).  A thermoset coating was enforced on the VCC and blank substrates. The surface was characterized by field emission scanning electron microscope (FE-SEM), elemental mapping of energy dispersive X-ray (EDX) and atomic force microscopy (AFM). The adhesion strength...

calcareous deposits formed on the part of steel that cathodic reactions occur on their surface. the purpose of this research is an investigation of the effect of potential on crystal form of the calcareous deposits and effect of them on the corrosion resistance of the mild steel in natural seawater. the electrochemical tests such as impedance and polarization tofel tests were used in order to i...

Cathodic corrosion is a process that etches metal electrodes under cathodic polarization. This process is presumed to occur through anionic metallic reaction intermediates, but the exact nature of these intermediates and the onset potential of their formation is unknown. Here we determine the onset potential of cathodic corrosion on platinum electrodes. Electrodes are characterized electrochemi...

The evolution of corrosion morphology and kinetics for magnesium (Mg) have been demonstrated to be influenced by cathodic activation, which implies that the rate of the cathodic partial reaction is enhanced as a result of anodic dissolution. This phenomenon was recently demonstrated to be moderated by the use of arsenic (As) alloying as a poison for the cathodic reaction, leading to significant...

The macroparticle content of titanium films deposited using a steered vacuum cathodic arc has been investigated. It has been found that the macroparticle number decreases with increasing steering magnetic field strength, and experimental results are found to be consistent with the model in which the number and mass of macroparticles arising from a cathode spot are proportional to the cathode sp...

Two microbial fuel cells with different oxygen supplies in the cathodic chamber were constructed. Electrogenic capabilities of both cells were compared under the same operational conditions. Results showed that binary quadratic equations can express the relationships between chemical oxygen demand degradation rate and chemical oxygen demand loading and between chemical oxygen demand removal rat...

A practical anodic and cathodic curve intersection model, which consisted of an apparent anodic curve and an imaginary cathodic line, was proposed to explain multiple corrosion potentials occurred in potentiodynamic polarization curves of Fe-based glassy alloys in alkaline solution. The apparent anodic curve was selected from the measured anodic curves. The imaginary cathodic line was obtained ...

A system is classified as multimodal if its language has more than one modal operator as primitive, and such operators are not interdefinable. We extend the anodic and cathodic modal systems, introduced in [BS09a] and [BS10], to a class of the so-called basilar multimodal systems generating, in this way, the classes of anodic and cathodic multimodal logics. The cathodic multimodal systems are d...