This experiment aims to demonstrate the efficacy of ceramic powder derived from various sources to inactivate avian influenza virus and its possibility to use in the environment. The ceramics used in the present experiment were derived from chicken feces (CF), scallop shell (SS), polyvinyl chloride (PVC) and soybean (SB). All ceramics were mixed with low pathogenic AIV (LPAIV) H7N1, and then ke...

The purpose of this study was to evaluate the influence of ceramic surface texture on the wear of rounded rod specimens. Plate specimens were fabricated from zirconia (ZrO2), feldspathic porcelain, and lithium disilicate glass ceramics (LDG ceramics). Plate surfaces were either ground or polished. Rounded rod specimens with a 2.0-mm-diameter were fabricated from type 4 gold alloy and heat-press...

The objective of this paper is to investigate the feasibility of making structural systems from ceramics. Segmental and composite systems are quantitatively studied, partial application of ceramics to traditional systems is considered, and the special application of a lunar base is studied. The quantitative and qualitative studies made indicate both advantages and disadvantages for ceramics in ...

Although lead-free piezoelectric ceramics have been extensively studied, many problems must still be overcome before they are suitable for practical use. One of the main problems is fabricating a multilayer structure, and one solution attracting growing interest is the use of lead-free multilayer piezoelectric ceramics. The paper reviews work that has been done by the authors on lead-free alkal...

OBJECTIVES This study evaluated the effect of three different surface conditioning methods on the bond strength of a Bis-GMA based luting cement to six commercial dental ceramics. METHODS Six disc shaped ceramic specimens (glass ceramics, glass infiltrated alumina, glass infiltrated zirconium dioxide reinforced alumina) were used for each test group yielding a total number of 216 specimens. T...

A ferroelectric heater under A.C. field was demonstrated by using lead zirconate titanate and barium titanate ceramics. The temperature of the ceramics was increased from room temperature to its curie temperature of phase transition under an A.C. field. The heating characteristics greatly depend on the compositions of ceramics. It is proposed that the heating behavior is related to the domain s...

A valuable characteristic of the "IPS Empress" used for producing all ceramic dental restorations is that it is a prefired ceramic ingot. The ingot is heated, softened and press-injected into the cavity, and ceramic restorations are fabricated by the lost wax casting method. The leucite crystal present in the ingot are scattered and distributed into the glassy phase in a more homogeneous manner...

The clinical goal when using ceramic biomaterials, as is the case with any biomaterial, is to replace lost tissue or organ structure and/or function. The rationale for using ceramics in medicine and dentistry was initially based on the relative biological inertness of ceramic materials compared with metals. However, in the past two decades, this emphasis has shifted more toward the use of bioac...

BaO -SiO2-Al2O3 glass ceramics containing K2O and B2O3 were prepared using conventional melting of powered batches, quenching in water and crystallization of sintered glass. XRD patterns introducehexacelsian and celsian as two major crystallized phases in sintered glass-ceramics. Presence of K2O enhances crystallization of hexacelsianin comparison withB2O3.Observations showed sintering temperat...

Europium doped transparent lead fluorophosphate glass ceramics successfully were prepared with heat treatment of precourse glasses at temperature above glass transition (Tg). X-ray diffraction (XRD) experiment evidenced the formation of PbF2 nanocrystals in glassy matrix. The emission spectra investigation indicate that considerable amount of Eu3+ ions were trapped in crystalline phase, and the...