OBJECTIVES The aim of this in-vitro study was to assess the long-term effects of hydrochloric acid on the surface roughness of three all-ceramic restorative materials CEREC VITABLOC Mark II CAD, IPS Empress CAD and IPS e.max CAD. MATERIALS AND METHODS Six cylindrical specimens (10mm diameter, 3mm height) of each material type were prepared, using the CEREC CAD/CAM machine. The unpolished samp...

The aim of this in vitro study was to observe the effect of hydrofluoric acid (HF) on the surface of two glass ceramics for Cerec and to compare it with the effect on a conventional glass ceramic. Discs were cut from a feldspathic ceramic block (VitaMKII) and from a leucite reinforced glass ceramic (IPS EMPRESS CAD) for Cerec. 5% and 9% HF concentrations were used during 1 min and 2 min each. A...

STATEMENT OF PROBLEM As digital impressions become more common and more digital impression systems are released onto the market, it is essential to systematically and objectively evaluate their accuracy. PURPOSE The purpose of this in vitro study was to evaluate and compare the trueness and precision of 6 intraoral scanners and 1 laboratory scanner in both sextant and complete-arch scenarios....

The purpose of this study was to evaluate and compare the microleakage and marginal discrepancy of ceramic crown-copings fabricated by three different CAD/CAM systems. Material and methods: Thirty extracted premolars were prepared for complete allceramic crowns with: total convergence 10-degree, 2 mm occlusal reduction, 4.5 mm height, 1.3 mm circular reduction and chamfer marginal preparation. ...

OBJECTIVE To evaluate the marginal gap (MG) and absolute marginal discrepancy (MD) of full ceramic crowns with two finish line designs, shoulder and chamfer, using microcomputed tomography (micro-CT) before and after cementation. MATERIALS AND METHODS Sixty extracted human maxillary premolar teeth were divided into two groups based on the finish line design: Group I: 90° shoulder and Group II...

This article describes CAD/CAM technology used in dentistry and different restorative materials used in conjunction with adhesive cementation with particular attention given to the evolution of the CEREC system, as well as various ceramics developed for this system. Advantages and limitations of materials and technique are also discussed.

Currently, two genres of CAD/CAM systems exist. One is used only in-office, while the other genre is a combination of in-office scanning and image transmission and milling of restorations or pouring of models in the laboratory. All systems start with scanning of the preparation, the method depending on the specific system. CAD/CAM systems have developed considerably, offering accuracy and more ...