Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...

in this study, the changes in microstructure of hp-nb cast heat resistant steel after 8 years of service at high temperatures were investigated. study of microstructure using optical microscopy (om) and scanning electron microscopy (sem) equipped with an energy dispersive spectrometry (eds) showed that the microstructure of this steel in as-cast condition includes an austenitic matrix, and that...

grate bar is an industrial part which is used in the indurating furnace of an iron ore pelletizing plant. steel part ofthe grate bars are expected to have high resistance to atmospheric oxidation because of its contact with hot gases(up to 920 °c) during the normal operation of the process. in this study, different samples from several sections ofused grate bars with apparent defects were selec...

The raw materials traditionally used as sources of chromium carriers (ferrochromium, chromium oxide and chromium powder) in application chromizing processes present a high price and some difficulties for ferrochromium grinding. In this work there is an assessment of the effect that has the use of the products of a reduction aluminothermic chromium concentrate on the characteristics and properti...

Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used to measure the concentrations of cobalt, tantalum, titanium, vanadium and chromium in solutions of tungsten carbide. The main advantage of the method described here lies in the speed, convenience and effectiveness of the dissolution procedure. Aliquots of powdered tungsten carbide were dissolved in a solution of 5% aqua...

Grate bar is an industrial part which is used in the indurating furnace of an iron ore pelletizing plant. Steel part ofthe grate bars are expected to have high resistance to atmospheric oxidation because of its contact with hot gases(up to 920 °C) during the normal operation of the process. In this study, different samples from several sections ofused grate bars with apparent ...

The increasing manufacturing technologies are a crucial aspect of industrialization. Laser additive is the process using laser (heat) technology to manufacture components from scratch and or strengthening repairing with aid functionally graded material upgrade properties components. combination Chromium-rich Vanadium-rich Carbide reinforced iron-based hard facings have gotten progressively sign...

Stainless steels have good corrosion resistance in many environments but welding or aging can decrease their resistance. This work focused on the effect of aging time and ultrasonic nano-crystal surface modification on the passivation behavior of 316L stainless steel. In the case of slightly sensitized 316L stainless steel, increasing the aging time drastically decreased the pitting potential, ...

We investigated the metal-diamond interface formation and the growth of chromium thin films as contact material on diamonds, which should help to improve single-crystal diamond (SCD) particle detectors. As shown previously [1], we are able to derive information about metal film conductivity by means of infrared spectroscopy (IRS) and analysing the data with a Drude type dielectric function. In ...

Abstract Metal-bonded grinding tools are commonly based on copper as bond material and possess low porosity. The powder metallurgic fabrication the applied process parameters have a high influence mechanical properties of these layers. In this study, Cu–diamond composites fabricated through Field Assisted Sintering Technology with variation holding time, temperature, pressure, chromium particle...