carbon dioxide flooding is considered to be one of the most effective enhanced oil recovery methods for the light oil reservoirs. depending on the operating pressure, the process might be miscible or immiscible. minimum miscibility pressure (mmp) is the most important parameter for assessing the applicability of any miscible gas flood for an oil reservoir. the miscibility condition is determine...

Carbon dioxide (CO2) injection has been used as a commercial process for enhanced oil recovery (EOR) since the 1970’s. Because the cost of oil recovered is closely linked to the purchase cost of the CO2 injected, considerable reservoir engineering design effort has gone into reducing the total amount of CO2 required to recover each barrel of oil. If, on the other hand, the objective of the CO2 ...

Controlled source electromagnetic transmitters create highly geometric coupled electric and magnetic vector fields that propagate in a way that is dependent on both the orientation of the transmitter and electrical conductivity distribution. There may be a good case for using cross well controlled source electromagnetic methods for monitoring injection of CO2 into deep saline or brackish sandst...

The injection of carbon dioxide (CO2) in deep, unmineable coalbeds is a very attractive option for geologic CO2 storage: the CO2 is stored and at the same time the recovery of coalbed methane (CBM) is enhanced. The revenue of methane (CH4) production can offset the expenditures of the storage operation. Coalbeds form complex gas reservoirs characterized by their dual porosity: they contain both...

Uncertainties of CO2 injection-sequestration in a CBM is driven by the complex process of gas desorptioncontrolled mechanism attributed to the natural characteristics of CBM and to the impact of the wells engaged in the reservoir. This work presents the reservoir characterization and simulation process focused on natural gas production and subsequent CO2 injection into an unmineable coal seam i...

Understanding mechanisms of oil mobilization of tight matrix during CO2 injection is crucial for CO2 enhanced oil recovery (EOR) and sequestration engineering design. In this study exposure behavior between CO2 and tight rock of the Ordos Basin has been studied experimentally by using nuclear magnetic resonance transverse relaxation time (NMR T2) spectrum and magnetic resonance imaging (MRI) un...

In addition to efforts aimed at reducing anthropogenic production of greenhouse gases, geological storage of CO2 is being explored as a strategy to reduce atmospheric greenhouse gas emission and mitigate climate change. Previous studies of the deep subsurface in North America have not fully considered the potential negative effects of CO2 leakage into shallow drinking water aquifers, especially...

Modern trends in iron metallurgy. Global carbon emissions from iron production. New solution for iron and steelmaking in a way reduce the CO2 emission to the level, where this might be needed in the post Kyoto period. New blast furnace technology, which operate with very low CO2 emissions based on drastically reduced consumption of carbon containing input materials. Injection of reducing gases ...

Coal mine gas disasters have severely restricted production safety. Improving extraction efficiency can effectively reduce disasters. Scholars confirmed that CO2 successfully displaces coal seam CH4. This study conducted displacement and in situ experiments compared drainage under different injection pressures. The indicated CH4 rates increased pressures while the ratios decreased. pressure had...

Geological storage of CO2 that has been captured at large, point source emitters represents a key potential method for reduction of anthropogenic greenhouse gas emissions. However, this technology will only be viable if it can be guaranteed that injected CO2 will remain trapped in the subsurface for thousands of years or more. A significant issue for storage security is the geomechanical respon...