We propose a model based control strategy to adapt the injection settings according to the air path dynamics on a Diesel HCCI engine. This approach complements existing airpath and fuelpath controllers, and aims at accurately controlling the start of combustion. For that purpose, start of injection is adjusted based on a Knock Integral Model and intake manifold conditions. Experimental results ...

The present work investigates the performance and emission characteristics of hydrous methanol fuelled Homogeneous Charge Compression Ignition (HCCI) engine. In the present work a regular diesel engine has been modified to work as HCCI engine. Hydrous methanol is used with 15% water content in this HCCI engine and its performance and emission behavior is documented. A spark plug is used for ass...

Two virtual sensors are proposed that use the spark-plug based ion current sensor for combustion engine control. The first sensor estimates combustion variability for the purpose of controlling exhaust gas recirculation (EGR) and the second sensor estimates the pressure peak position for control of ignition timing. Use of EGR in engines is important because the technique can reduce fuel consump...

Homogeneous charge compression ignition (HCCI) seems to be the most promising solution for gasoline engines in the light of future emissions regulations. This novel combustion technique allows for significant reduction of fuel consumption and engine-out NOX emissions at low and medium engine load/speed conditions. High heat release rate enables realization of the Otto cycle close to ideal, incr...

This paper presents a model of an electric variable valve timing (EVVT) system and its closed-loop control design with experimental validation. The studied EVVT uses a planetary gear system to control the engine cam timing. The main motivation of utilizing the EVVT system is its fast response time and the accurate timing control capability. This is critical for the combustion mode transition co...

Combustion in homogeneous charge compression ignition (HCCI) engine is controlled auto ignition of well-mixed fuel, air and residual gas. Since onset of HCCI combustion depends on the auto ignition of fuel/air mixture, there is no direct control on the start of combustion process. Therefore, HCCI combustion becomes unstable rather easily especially at lower and higher engine load. Charge strati...

This work is carried out to investigate combustion characteristics of a dual fuel (diesel-gas) engine at part loads, using a quasi-dimensional multi zone combustion model (MZCM) for the combustion of diesel fuel and a single zone model with detailed chemical kinetics for the combustion of natural gas fuel. Chemical kinetic mechanisms consist of 184 reactions with 50 species. This combustion mod...

In order to directly control the premixed combustion phasing, a Jet Controlled Compression Ignition (JCCI) for diesel premixed compression ignition systems is investigated. Experiments were conducted on a single cylinder natural aspirated diesel engine without EGR at 3000 rpm. Numerical models were validated by load sweep experiments at fixed spark timing. Detailed combustion characteristics we...

This paper presents the modeling and control of a prototype compact free liquid-piston engine compressor. The dynamic model includes 1) the injection dynamics of the air/fuel mixture, 2) the dynamics of heat release during combustion, 3) the inertial dynamics of the magnetically latched combustion valve, 4) the mass flow dynamics of the combustion and exhaust valves, 5) the inertial dynamics of...

investigations are carried out to evaluate the performance of a low heat rejection (lhr) diesel engine consisting of air gap insulated piston with 3-mm air gap, with superni (an alloy of nickel) crown and air gap insulated liner with superni insert with different operating conditions of crude jatropha oil with varied injection timing and injection pressure.  performance parameters of brake ther...