Ethanol is largely used as a solvent in the synthesis of varnishes and perfumes. It is also used as a preservative for biological products, fuel, and gasoline additives. Anethanol-water mixture, normally obtained by fractional distillation</span...

a shortcut procedure as quick, easy-to use method for design and simulation of multicomponent batch distillation is used to predict the operating condition of recovering xylene from solvent in an existing batch distillation column in benzol refinery. the procedure can be used to investigate the effect of the operating parameters on the operation of column for three possible modes of batch disti...

In this paper, we propose a novel algorithm for the rigorous design of distillation columns that integrates a process simulator in a generalized disjunctive programming formulation. The optimal distillation column, or column sequence, is obtained by selecting, for each column section, among a set of column sections with different number of theoretical trays. The selection of thermodynamic model...

A batch reactor may be combined directly with a distillation column by distilling off the light component product in order to increase the reactor temperature or to improve the product yield of an equilibrium reaction. The same amount of the light product should be removed as the amount being formed by the reaction at any time. A linearized model has been developed which describes the process b...

This paper projected fuzzy logic control based intention has been protruded for a methanol water arrangement of bubble cap distillation column. In this distillation column is extremely nonlinear and conventional control is controlling the composition is a difficult task. Fuzzy inference system (FIS) and fuzzy rule based system (FRBS) is designed to govern the manipulate variable (reflux ratio) ...

The paper presents the analysis of the thermal efficiency of a dividing wall distillation column and the influence of the feed composition on the reduction of energy consumption compared to a classical scheme of multicomponent mixture separation. The study relays on rigorous simulations in HYSYSTM using thermodynamically equivalent schemes. A case study is presented for the separation of a hydr...

This paper is concerned with the computer-aided optimal design of reaction-distillation processes. The production of solvent 2,3-dimethylbutene-1 by isomerization of 2,3dimethylbutene-2 is considered as an innovative benchmark problem. Possible process candidates are a reactive distillation column, a reactor coupled to a nonreactive distillation column or a reactive reboiler with a nonreactive ...

-Several alternative strategies have been suggested to increase the productivity of batch distillation. One is the use of inverted columns where the feed is charged to the condenser drum instead of to the reboiler as for regular columns. In the first part of this paper, optimal results in terms of minimum operating time for separations in a regular and an inverted batch column are presented. Th...

Previously, Tanskanen and Pohjola (2000) and Tanskanen and Malinen (2005) have presented a method of rigorous minimum energy calculation for non-ideal multicomponent distillation. The method is based on column simulation with a large number of equilibrium stages to mimic infinitely high columns, and it has been successfully tested with simple distillation column systems. This paper describes a ...

Reactive distillation has received intense attention due to the well known benefits of integrating distillation with reaction in a single unit. While there are procedures available for the synthesis of non-reactive columns and of reaction-separation systems, the design of reactive distillation columns is still a challenge. This work presents a new synthesis and design methodology for reactive d...