The sections composed of concrete and steel, which include concrete-encased concrete-filled tubes, generally have defects due to the low tensile strength of concrete. Therefore, an appropriate method was used for the combination of concrete-filled tubes (CFT) and prestressing strands which is encased in concrete. The conventional design guidelines are commonly developed for materials with norma...

The mechanical properties of 15 elastomeric liner products used in limb prosthetics were evaluated under compressive, frictional, shear, and tensile loading conditions. All testing was conducted at load levels comparable to interface stress measurements reported on transtibial amputee subjects. For each test configuration, materials were classified into four groups based on the shapes of their ...

A homogenization sampling procedure is introduced which allows computation of effective trabecular bone stiffness and individual trabecula level stress based on precise models of trabecular bone architecture. Three-dimensional digitized images of 53 trabecular bone specimens with a resolution of 50 microns per voxel were directly converted into three-dimensional finite element meshes by making ...

We present a new method to locally apply mechanical tensile and compressive force on single cells based on integration of a microfluidic device with an optical laser tweezers. This system can locate a single cell within customized wells exposing a square-like membrane segment to a functionalized bead. Beads are coated with extracellular matrix (ECM) proteins of interest (e.g. fibronectin) to ac...

The objective of this study was to determine the effects of temporal hydrostatic pressure (HP) on the properties of scaffoldless bovine articular cartilage constructs. The study was organized in three phases: First, a suitable control for HP application was identified. Second, 10 MPa static HP was applied at three different timepoints (6-10 days, 10-14 days, and 14-18 days) to identify a window...

an aircraft wing needs to display different mechanical behavior in different directions. 1- stiffness in the spanwise (transverse to the corrugation) direction which enables the aerodynamic and inertial loads to be carried. 2- compliance in the chordwise (corrugation) direction which would allow shape changes and increases in surface area; whereas a corrugated sheet due to their special geometr...

Bellows are special structures that require high strength as well as good flexibility. The design, manufacture, and analysis of bellow tubes thus are more complicated. Test of bellows to understand their mechanical behavior, and to verify a design purpose finite element program is needed for practical use. In this paper, digital-image-correlation method is applied to measure the stiffness of si...

There have been numerous researchers that have investigated the properties of human intervertebral discs. However, there has been no attempt to characterize the effects of dynamic loading on the compressive stiffness of human lumbar intervertebral discs. Therefore, the purpose of this study was to develop the compressive stiffness properties of lumbar intervertebral discs when subjected to vari...

Residual drifts after severe earthquakes interrupt serviceability of buildings. Retrofitting of such buildings is in many cases very difficult and consumes lots of time and money. Recently, there are some attempts to develop the seismic design procedures to not only satisfy life safety criteria but also lead to more economical buildings. One of these modern methods of improving seismic performa...

This paper presents a finite element analysis on the tensile stiffness of steel bolted connections, which are fabricated from thin-walled cold-formed steel strips and members. This type of bolted connection is usually used to assemble the diagonal bracing member in the light steel structure. Unlike the architectural steel structure, thin walled steel bolted connection cannot be simplified into ...