the brass tubes with foam cores of alsi7sic3, alsi7sic3fe1 and alsi7sic3fe3 were produced as the crush-boxes with circle and square cross-section. then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. the uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

Using first-principles method, we calculate the electronic band structure of biaxially strained silicon, from which we analyze the change in electron and hole effective mass as a function of strain and determine the mobility of electrons and holes in the biaxially strained silicon based on Boltzmann transport theory. We found that electron mobility increases with tensile strain and decreases wi...

The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

This paper investigates the effects of unequal compressive and tensile moduli of carbon fibre reinforced plastic (CFRP) composites. The basic assumption is based on the statistics that the compressive modulus is a fraction lower than the tensile modulus. Data evaluated by Finite Element Analysis (FEA) model, Classical Laminate Theory (CLT) model, and experiment are used to investigate these eff...

the aim of this work is to evaluate the influence of fabrication methods on the com-pressive properties of sandwich composites using both experimental work and numerical simulations. two types of sandwich composites with e-glass/kevlar/polyester resin facings and end-grain balsa wood as core have been produced by vacuum infusion processing (vip) and hand-lay up (hl) method. compression tests on...

We evaluated amorphous silicon thin-film transistors ~TFTs! fabricated on polyimide foil under uniaxial compressive or tensile strain. The strain was induced by bending or stretching. The oncurrent and hence the electron linear mobility m depend on strain « as m5m0(11263«), where tensile strain has a positive sign and the strain is parallel to the TFT source-drain current path. Upon the applica...

We demonstrate the application of polymer planar Bragg gratings for multi-axial strain sensing and particularly highlight simultaneous 2D strain measurement. A polymer planar Bragg grating (PPBG) fabricated with a single writing step in bulk polymethylmethacrylate is used for measuring both tensile and compressive strain at various angles. It is shown that the sensitivity of the PPBG strongly d...

Steel embedded in cement mortar in the uniaxial compressive stress direction was found to decrease by 80% the compressive longitudinal strain at a given stress and increase by 300% the tensile transverse strain at a given longitudinal strain. The former effect is due to longitudinal confinement of mortar by steel. The latter is due to debonding at the steel-mortar interface. © 1999 Elsevier Sci...

Samarium nickelate (SmNiO3) thin films were successfully synthesized on LaAlO3 and SrTiO3 substrates using pulsed-laser deposition. The Mott metal-insulator (MI) transition of the thin films is sensitive to epitaxial strain and strain relaxation. Once the strain changes from compressive to tensile, the transition temperature of the SmNiO3 samples shifts to slightly higher values. The optical co...

statement of problem: biomechanics of the human dentition is inherently complex. purpose: the aim of this study is to investigate, in vitro, the creep and the recovery of dentin under static uniaxial compressive stress conditions. materials and methods: specimens of cylindrical morphology were prepared from recently extracted non-carious lower molar teeth, such that the average tubule orientati...