Manufactured sand differs from natural sea and river dredged sand in its physical and mineralogical properties. These can be both beneficial and detrimental to the fresh and hardened properties of concrete. This paper presents the results of a laboratory study in which manufactured sand produced in an industry sized crushing plant was characterised with respect to its physical and mineralogical...

Workability is regarded as one of the important parameters of high-performance concrete and monitoring it is essential in concrete quality management at construction sites. The conventional workability test methods are basically based on length and time measured by a ruler and a stopwatch and, as such, inevitably involves human error. In this paper, we propose a 4D slump test method based on di...

Concrete rheological properties need to be properly measured and predicted in order to characterize the workability of fresh concrete, including special concretes such as self-consolidating concrete (SCC). It was shown by a round-robin test held in 2000 [1,2] that different rheometer designs gave different values of viscosity for the same concrete. While empirical correlation between different ...

This paper presents the results of an experimental research on the workability and compressive strength of ordinary and standard concrete. Superplasticizers are commonly known as High Range Water Reducers (HRWRs) because it permits low water cement ratio as well as the workability also affected. In this paper the properties of concrete mixtures with three different dosages of superplasticizers ...

Effort towards preserving natural coarse aggregate for future generation and reducing cockle shell waste originating from the fisheries industry has initiated studies on possibility of integrating this waste in concrete production. This paper presents the result on the workability and compressive strength of concrete containing various percentage of cockle shell content as partial coarse aggreg...

This paper presents the results of an experimental research on the workability and mechanical properties of self-compacting concrete. The work focused on concrete mixes having Water/Cement ratios of 0.23, 0.24, 0.25, 0.26 and 0.27, with a Packing Factor of 1.12. The Concrete mixes contains different proportions of GGBS, Super plasticizers, water binder ratios and constant proportions of Cement,...

To increase the applications of Natural Rubber Latex Modified Fiber Reinforced HighPerformance-Concrete (NRLMFRHPC) in India, greater understanding of NRLMFRHPC produced with locally available materials such as cement , Fine aggregates , coarse aggregates, Metakaolin and Crimped Steel fibers is essential. In the present investigation, NRLMFRHPC has been produced with locally available aggregate...

Cementitious matrices are the fragile materials that possess a low tensile strength. The addition of fibers randomly distributed in these matrices improves their resistance to cracking, substantially. However, the incorporation of fibers into a plain concrete disrupts the granular skeleton and quickly causes problems of mixing as a result of the loss of mixture workability that will be translat...

Self compacting concrete (SCC) is an innovative development of conventional concrete, which requires high binder content to increase its segregation resistance. This paper presents a comparative study on the use of different materials as binder content in SCC and their effects on the workability and strength properties are checked. Different combinations of Fly ash, Metakaolin and Saw dust ash ...

Due to growing environmental concerns of the cement industry, alternative cement technologies have become an area of increasing interest. It is now believed that new binders are indispensable for enhanced environmental and durability performance. Self-compacting Geopolymer concrete is an innovative method and improved way of concreting operation that does not require vibration for placing it an...