numerous techniques have been presented by different researchers to analyze piled raft. in order to analyze pile foundation, soil can be modeled as spring, continuous medium, or porous media. pile can also be modeled as spring or continuous medium. this study includes three main stages: a short description of different types of analysis methods of pile foundation, writing a computer program bas...

In order to understand the load sharing and settlement reduction behaviour of piled raft resting on soft clay, 1g model tests were conducted on small-scale models. The parameters studied were the effect of pile length and number of piles. The load settlement behaviour obtained from the tests has been validated using simplified method (Polous & Davis). Equivalent pier concept of Poulos and Davis...

study on the seismic behavior of piled rafts and pile groups while the same amount of construction material and excavation is used in their construction, are the main objective of this research. the process where the raft interaction with soil can affect the seismic response and stress distribution is also discussed in the current study. by means, abaqus software was applied for the finite elem...

Numerous techniques have been presented by different researchers to analyze piled raft. In order to analyze pile foundation, soil can be modeled as spring, continuous medium, or porous media. Pile can also be modeled as spring or continuous medium. This study includes three main stages: a short description of different types of analysis methods of pile foundation, writing a computer program bas...

In the case of problematic soils and tall buildings where the design requirements cannot be satisfied merely by a raft foundation, it is of common practice to improve the raft performance by adding a number of piles so that the ultimate load capacity and settlement behavior can be enhanced. In this study, the effect of spatial variability of soil parameters on the bearing capacity of piled raft...

The present paper aims to investigate the effects of defective piles in horizontally loaded piled raft foundations. Close real scale foundation models and intact three-piled systems were submitted horizontal load tests. used bored type drilled with 5 m length 0.25 diameter, connected a concrete founded on tropical soil profile at University Campinas research site. Based experimental data, three...

The use of embedded pile elements provides a convenient approach that may save significant modelling time in the simulation of piled foundations. A back-analysis of an Osterberg-cell (O-Cell) load test on a 45 m long pile is presented to illustrate some of the advantages of using structural embedded elements. Comparisons with other modelling approaches for piled-raft foundations have showed goo...

Abstract Until recently, the behavior of connected piled raft foundation was not fully understood in seismically active region due to complex dynamic soil–pile–foundation structure interaction. This concern arises when soil deposit-supported foundations are stratified or heterogynous and subjected high ground motion intensity. In current study, a series numerical analyses using ABAQUS software ...

Windmill structures must withstand very high horizontal loading giving an extremely large overturning moment on the foundation. These structures have very low stability loads in comparison to the overturning loads. The traditional way to solve the construction problem uses a shallow foundation with a massive concrete volume or a piled foundation to resist the extreme overturning moment. This wo...

A Shallow foundation on cohesionless soil cannot support greater weights; piled raft foundations are recommended because they combine the load-bearing qualities of piles and raft. Combined Piled Raft Foundations (CRPF) efficient for tall buildings account both vertical lateral loads. In a pile foundation, raft’s load-resistance is disregarded due to soil-structure interaction. Simplification ma...