This study provides a comprehensive methodology for optimizing the design of a twophase micro-channel heat sink. The heat sink parameters are grouped into geometrical parameters, operating parameters, and thermal/fluid parameters. The objective of the proposed methodology is to optimize micro-channel dimensions in pursuit of acceptable values for the thermal/fluid parameters corresponding to a ...

the main purpose of this study is to perform numerical simulation of nanofluids as the coolant in vver-440 fuel rod bundle. the fuel rod bundle contains 60 fuel rods with length of 960 mm and 4 spacer grids. in vver-440 fuel rod bundle the coolant fluid (water) is in high pressure and temperature condition. in the present thermo-hydraulic simulation, water-al2o3 nanofluids containing various vo...

Advanced automotive thermal management systems integrate electro-mechanical components for improved fluid flow and thermodynamic control action. Progressively, the design of ground vehicle heating and cooling management systems require analytical and empirical models to establish a basis for real time control algorithms. One of the key elements in this computer controlled system is the smart th...

A full scale SI engine has been imported in to the CFD tool to analyse the temperature distribution of coolant throughout the cooling channels. The segregated approach solver has been adopted to solve the energy equations along with the RANS two layer turbulence model to find out accordance with the available theoretical and published results. The input values are collected from complete vehicl...

In order to study the heat transfer characteristics, a micro heat pipe (MHP) of circular geometry having inner diameter 1.8 mm and length 150 mm is designed and fabricated. An experimental investigation is carried out also to investigate the performance of the MHP with different experimental parameters. These experimental parameters include inclination angle, coolant flow rate, working fluid an...

Cooling is one of the most important challenges in industries, especially in the automotive industry. The coolant which is used in engine radiators possesses lower thermal conductivity. To enhance the thermal properties, coolant was dispersed in nano-sized particles and the fluid is called as Nanofluid. In this Study, Silica Nanoparticle was dispersed in Paraflu Engine coolant usin...

An internal combustion engine requires a proper cooling system to release heat from the engine. The working fluid or coolant in water-cooled impacts overall radiator performance. Several studies show that nanopowder can increase thermal performance of base fluids, although pressure drops significantly. This paper describes experimental study motorcycle using ZnO with distilled water and commerc...

A new design concept is introduced to control the near-wall integration between the hot-gas boundary layer and the cooling jets in order to enhance the adiabatic film cooling effectiveness of the gas turbine blades. In this new approach, another film cooling port, having a very low blowing ratio, which prevents formation of the counter-rotating vortex pare, is applied just upstream of the main ...

A flex hose assembly containing aqueous coolant from the International Space Station (ISS) Internal Active Thermal Control System (IATCS) consisting of a 2 foot section of Teflon hose and quick disconnects (QDs) and a Special Performance Checkout Unit (SPCU) heat exchanger containing separate channels of IATCS coolant and iodinated water used to cool spacesuits and Extravehicular Mobility Units...

In order to determine system parameters for in-process optical measurement for workpiece surface profiles during machining, an experimental system was established to validate theoretical models. It was found that the coolant flow patterns were one of the critical factors, which affect the effectiveness of the measurement. To obtain the flow patterns, an image processing method had been proposed...