This work describes the synthesis of a novel magnetic graphene oxide composite for removal of Cr(VI) ions. The synthesized nanosorbent were characterized with various techniques such as FT-IR, X-ray diffraction (XRD), scanning electron microscopy (SEM), elemental analysis and vibrating sample magnetometry (VSM). This material is illustrated to represent a viable sorbent for the removal of Cr(VI...

The present study investigates an NF process for removal of copper and hexavalent chromium, studying the effect of pH (5, 7, 9) as well as contaminants' concentration (50, 500, 5000 µg/L) at a constant pressure of 8 bar; with the recovery rate, regulated at 75±2%. To determine the main factors, affecting the system performance, and evaluate the interaction effects among the factors, the experim...

The interaction between the ions and the charge of membranes can affect the efficiency of pollutant removal. The present study investigated the removal efficiency of hexavalent chromium and nitrate ions from both actual and synthetic contaminated water via two different commercial spiral wound polyamide nanofilters. In addition, the interaction of ions under different experimental conditions wa...

Removal of toxic Cr(VI) by microbial reduction is a promising approach to reducing its ecotoxicological impact. To develop bioremediation technologies, many studies have evaluated the application of microorganisms isolated from Cr(VI)-contaminated sites. Nonetheless, little attention has been given to microbes from the environments without a history of Cr(VI) contamination. In this study, we ai...

Bacillus cereus was used to remove Cr(VI) in tannery wastewater containing medium at different initial Cr(VI) concentration, temperature, pH and biomass to get better conditions. At the optimum condition, the Cr(VI) in tannery wastewater was treated by each component of the cells to detect the capacity of the components for the Cr(VI) reduction. Also, the Bacillus cereus was continuous cultured...

The removal of toxic Cr(VI) by microorganisms is a promising approach for Cr(VI) pollution remediation. In the present study, four indigenous bacteria, named LY1, LY2, LY6, and LY7, were isolated from Cr(VI)-contaminated soil. Among the four Cr(VI)-resistant isolates, strain LY6 displayed the highest Cr(VI)-removing ability, with 100 mg/l Cr(VI) being completely removed within 144 h. It could e...

The present study investigates an NF process for removal of copper and hexavalent chromium, studying the effect of pH (5, 7, 9) as well as contaminants' concentration (50, 500, 5000 µg/L) at a constant pressure of 8 bar; with the recovery rate, regulated at 75±2%. To determine the main factors, affecting the system performance, and evaluate the interaction effects among the factors, the experim...

Here we reported the investigation of enhanced performance for the removal of hexavalent chromium (Cr (VI)) by a new microbial fuel cell (MFC) with natural pyrrhotite-coated cathode. By comparisons of the graphite-cathode, the MFCs equipped with a pyrrhotite-coated cathode generated the maximum power density of 45.4 mW·m−2 that was 1.3 times higher than that of with bare graphite cathode (35.5 ...

For Cr(VI)-removal microbial fuel cell (MFC), a more efficient biocathode in MFCs is required to improve the Cr(VI) removal and electricity generation. RVC-CNT electrode was prepared through the electrophoretic deposition of carbon nanotube (CNT) on reticulated vitreous carbon (RVC). The power density of MFC with an RVC-CNT electrode increased to 132.1 ± 2.8 mW m-2, and 80.9% removal of Cr(VI) ...