Mechanisms for fatigue crack closure under plane strain conditions have recently been identified at very low (near-threshold) stress intensities in terms of effects of excess corrosion deposits or fracture surface roughness in promoting premature closure of the crack. In the present paper, a geometric model is presented for crack closure induced by fracture surface roughness. This model specifi...

Using cold working fastener holes is a simple life enhancement procedure that strengthens metallic components by retarding crack growth around a hole. In the present paper, the residual stress field that is induced by the hole expansion process is obtained based on different material models namely elastic perfect plastic, isotropic hardening and kinematic hardening using three-dimensional finit...

Fatigue crack growth was investigated in a 001 1⁄2 oriented single crystal specimen, made of a Ni-based superalloy, Haynes 230. Crack propagation was characterized with digital image correlation: crack closure, measured by analyzing the relative displacements of crack flanks, showed closure levels much lower than polycrystal alloys. Reversed plastic zones were calculated from regressed stress i...

The theory for the constant rate of crack closure was investigated. The aim of this theory is to explain why the rate of crack closure is constant during the wetting stage of healing. Assuming that a surface crack in a material is treated by compression or with solvent, its crack closes up at a constant rate and its shape is independent of time. This approach was based on the Gibbs energy of an...

The present paper is concerned with the application of a “plasticity-induced” crack closure model to study fatigue crack growth under various load histories. The model was based on the Dugdale model but modified to leave plastically deformed material in the wake of the advancing crack. The model was used to correlate crack growth rates under constant-amplitude loading and then used to predict c...

Fatigue crack growth behavior has been examined in a particulate titanium diboride (TiB2)–reinforced iron-based composite that had been produced via a mechanical alloying process. Comparison with equivalent unreinforced material indicated that fatigue crack growth resistance in the composite was superior to monolithic matrix material in the near-threshold regime. The composite exhibited relativ...

Abstract-A plate with a pre-existent through crack is considered under the action of a remote bending moment and a remote in-plane force. The problem statement is reduced to the solution of two coupled integral equations with strongly singular kernels. The independent variables in the latter equations are the closure displacement and rotation angle. The corresponding closure force and moment di...

Progressive radial cracking of a clamped plate subjected to crack-face closure is studied. The material behavior is assumed to be elastic-brittle. The cracks are assumed to be relatively long in the sense that the three-dimensional contact problem can be described via a statically equivalent two-dimensional idealization. The number of cracks is supposed large enough to permit a quasi-continuum ...

A plasticity-induced crack-closure model was used to study fatigue crack growth and closure in thin 2024-T3 aluminum alloy under constant-R and constant-Kmax threshold testing procedures. Two methods of calculating crack-opening stresses were compared. One method was based on contact-K analyses and the other on contact crack-openingdisplacement (COD) analyses. These methods gave nearly identica...