Plasma irradiation on surface of heat-cured acrylic resin prior to processing self-curing acrylic resin is likely to effectively increase the adhesive strength between these materials for short-term period. However, long-term reliability of adhesive strength between these materials has not been clarified yet. In the present study, these materials were stored in water for a long period (100 days...

A method is described for the fabrication of a closed hollow bulb obturator prosthesis using a hard thermoforming splint material and heat-cured acrylic resin. The technique allowed the thickness of the thermoformed bulb to be optimized for weight reduction, while the autopolymerized seal area was covered in heat-cured acrylic resin, thus eliminating potential leakage and discoloration. This te...

The absence or poor chemical bonding of acrylic resin to Cobalt-Chromium metal frameworks, often introduces microleakage and bond failure at the interface. The aim of this study was to compare the shear bond strength of sandblasted cast and ingot cobaltchromium alloy to heat-cured and self-cured acrylic resins primed with four different metal primers. Fifty Co-Cr Ingot and fifty cast specimens ...

OBJECTIVE The purpose of this study was to compare the effects of mechanical polishing (MP) and chemical polishing (CP) on the average surface roughness (Ra) of heat-cured (HC) and light-cured (LC) denture base acrylic resins. METHODS A total of 120 specimens (30 × 15 × 3 mm) were prepared from one HC and one LC acrylic resin. To remove nodules and gross surface irregularities, all specimens ...

This study investigated the effect of sulfur-containing primers for noble metals on the shear bond strength of self-cured acrylic resin after thermal cycling (TC). Four pure metals (Au, Ag, Cu, and Pd) and type IV Au alloy were either untreated, or treated with one of the five sulfur-containing metal primers (V-Primer, Metaltite, Alloy Primer, Metal Link Primer, and Metal Primer Z). Afterwards,...

OBJECTIVE To compare shear bond strength of different direct bonding techniques of orthodontic brackets to acrylic resin surfaces. METHODS The sample comprised 64 discs of chemically activated acrylic resin (CAAR) randomly divided into four groups: discs in group 1 were bonded by means of light-cured composite resin (conventional adhesive); discs in group 2 had surfaces roughened with a diamo...

AIMS AND OBJECTIVES To evaluate and compare the effect of fiber reinforcement on the dimensional changes of heat-cured poly (methyl methacrylate) resin after processing and immersion in water. MATERIALS AND METHODS Three different heat-cure resins were selected for the present study: (1) Nonreinforced heat-cure methyl methacrylate resin, (2) High Impact heat-cured methyl methacrylate resin an...

Purpose: Acrylic dentures frequently fracture during service due totheir poor strength characteristics. The aim of this study was to evaluate the effects of adding 5%, 10% and 15% aluminum oxide powder on the flexural strength, surface hardness of a conventional heat-polymerized acrylic resin. Materials and methods: One of the commonly used conventional heat cure denture base resin (DPI) and hi...

In this study, we investigated the effect of different solutions--coffee, tea, Turkish coffee, artificial saliva, mouthwash, denture cleanser, and distilled water--on the bond strength of soft lining materials (one acrylic- and three silicone-based) to acrylic resin. Acrylic specimens (40x10x10 mm) were prepared for the bond strength test. The specimens were stored in different solutions and te...

BACKGROUND It is not yet clear from the current literature to what extent masticatory muscle activity is affected by the use of flexible acrylic resin in the construction of implant-supported mandibular overdentures. OBJECTIVE To compare masticatory muscle activity between patients who were provided with implant-supported mandibular overdentures constructed from flexible acrylic resin and tho...