objective(s): a box-behnken design was used for evaluation of eudragit coated diclofenac pellets. the purpose of this work was to optimize diclofenac pellets to improve the physicochemical properties using experimental design. materials and methods: diclofenac was loaded onto the non-pareil beads using conventional coating pan. film coating of pellets was done at the same pan. the effect of pla...

This data article provides a comparison data for nano-cement based concrete (NCC) and ordinary Portland cement based concrete (OPCC). Concrete samples (OPCC) were fabricated using ten different mix design and their characterization data is provided here. Optimization of curing time using the Weibull distribution model was done by analyzing the rate of change of compressive strength of the OPCC....

We commercialized Reactive Coke Agglomerate (RCA), a cement-bonded pellet to decrease the thermal reserve zone temperature for the reduction of the reducing agent rate of blast furnaces. To achieve a high productivity of supplying RCA to large blast furnaces, a rapid curing process of RCA using steam was investigated. We obtained rapid curing of RCA within 18 h by combining primary curing for 1...

The curing reaction of a commercial cold-curing structural epoxy resin, specifically formulated for civil engineering applications, was analyzed by thermal analysis as a function of the curing time and the sample thickness. Original and remarkable results regarding the effects of curing time on the glass transition temperature and on the residual heat of reaction of the cold-cured epoxy were ob...

in this paper , the effect of curing time and temperature as well as various primers on durability of high density polyethylene on plain carbon steel have been investigated. the aim is to increase adhesion, improve durability and also to produce a defect-free in order to improve the corrosion resistance of steel substrate. for this purpose, after surface preparation and applying a primer (zinc ...

Cement stabilization has been widely used for improving the strength and stiffness of soft clayey soils. Cement treated soil specimens used to investigate the stress-strain behaviour in the laboratory study are usually cured for 7 days. This paper examines the effects of curing time on the strength and stress strain behaviour of cement treated marine clay under triaxial loading condition. Labor...

This paper reports the results of an experimental work conducted to investigate the effect of curing conditions on the compressive strength of self-compacting geopolymer concrete prepared by using fly ash as base material and combination of sodium hydroxide and sodium silicate as alkaline activator. The experiments were conducted by varying the curing time and curing temperature in the range of...

This study investigated the influence of curing distance on µ-flexural strength (µ-FS) a nano-hybrid composite, cured using manufacturer-recommended time (MCT), compared to consistent radiant exposure (CRE) three different light-curing units (LCUs). Beams (6×2×1 mm) were MCT or CRE with quartz-tungsten-halogen (QTH); single-emission-peak light-emitting-diode (SLED), multiple-emission-peak (MLED...

The mechanical properties of the light-cured composite resins are related to the material composition, but also vary according to the light-source characteristics used for polymerization. In this study we followed the compressive strength variation for a light-cured composite resin according to the time of exposure to the curing light. With that end in view,18 test pieces were made from a light...

one of the common methods to cure unsaturated polyester resins is to use dual initiators. in order to produce an appropriate composite, it is necessary to know the effect of dual initiators on curing behavior. in this paper the effect of benzoyl peroxide, bpo, and tertiary butyl perbenzoate, tbpb, and their mixtures on thermal curing of an unsaturated polyester resin have been investigated. bpo...