STATEMENT OF PROBLEM Dynamic mechanical properties of hard, direct reline resins are important factors in the clinical success of dentures. However, little information is available on the nature of these properties. PURPOSE This study evaluated the dynamic mechanical properties of a variety of hard, direct reline resins: (1) visible light-polymerized, powder-liquid type, (2) visible light-pol...

PURPOSE This study evaluated the shear bond strengths of light-polymerized urethane dimethacrylate (Eclipse) and heat-polymerized polymethylmethacrylate (Meliodent) denture base polymers to intraoral and laboratory-processed reline materials. MATERIALS AND METHODS Thirty disks measuring 15 mm diameter and 2 mm thick were prepared for each denture base material following the manufacturers' rec...

Objective: This study evaluated the reinforcing effect of glass fiber-reinforced composite (FRC) reinforcement on flexural strength at the proportional limit (FS-PL) of a repaired denture base resin. Materials and methods: Repaired denture base resins reinforced with metal and with FRC reinforcement, and that without reinforcement were tested. The ultimate flexural strength, the FS-PL and the e...

OBJECTIVE The shear bond strengths of two hard chairside reline resin materials and an auto-polymerizing denture base resin material to cast Ti and a Co-Cr alloy treated using four conditioning methods were investigated. MATERIAL AND METHODS Disk specimens (diameter 10 mm and thickness 2.5 mm) were cast from pure Ti and Co-Cr alloy. The specimens were wet-ground to a final surface finish of 6...

Aim: Both conventional and flexible resins may show color alteration due to intrinsic and extrinsic factors. The aim of this study was to evaluate the color changes of the polyamid and heat polymerized acrylic denture base materials in storage of different staining solutions. Methods: Two denture base materials were used in this study. The speciemens were stored in two staining solutions (tea, ...

OBJECTIVE To evaluate the effect of four commercially available denture adhesives (DAs) on surface roughness of two chemically different denture base materials. MATERIALS AND METHODS Fifty specimens of heat-cured polymethyl methacrylate, and another fifty specimens of light-cured urethane dimethacrylate were divided into five groups (n = 10), each was immersed in four prepared DAs (Corega Sup...

BACKGROUND The aim of this study was to evaluate and compare the porosities in the mandibular acrylic denture bases processed by heat and microwave polymerization techniques, using two different brands of commercially available denture base resins. MATERIALS & METHODS Two brands of heat activated denture base resins, DPI plain and Acralyn H cross linked denture base resins designed for conven...

Denture base resins are extensively used in dentistry for a variety of purposes. These materials can be classified as chemical, heat, light, and microwave polymerization materials depending upon the factor which starts the polymerization reaction. Their applications include use during denture base construction, relining existing dentures, and for fabrication of orthodontic removable appliances....

AIMS Present study aimed at evaluating the colour stability and flexural strength of flexible denture base materials (Valplast) and Polymethyl methacrylate (PMMA) denture base material (Meliodent) processed by two different methods (Injection moulding and compression moulding) after immersing them in three different denture cleansers with acidic, basic and neutral PH. METHODS AND MATERIALS To...