A number of studies currently focus on the renewable fuels to reduce the reliance on petroleum fuels. Biofuels such as biodiesel and bioethanol have been studied and tested in many countries including India. One of the methods to reduce the use of fossil fuel is blending ethanol with fossil diesel. However, an emulsifier or a co-solvent is needed to homogenize the diesel-ethanol blends. The ric...

The paper discusses the influence of two fatty acid methyl esters (bioesters) derived from soybean oil (SME) and from rapeseed oil (RME) on the lubricity of the petroleum diesel fuels: Ekodiesel (S:26 mg/kg, HFRR: 555 m) and Citydiesel (S: 8 mg/kg, HFRR: 617 m). High-frequency reciprocating rig (HFRR) equipment was used to examine diesel fuels, neat bioesters and blends containing from 0,1 % up...

This research presents effect of triacetin and ethanol as additive to biodiesel (Neem oil methyl ester) on the performance and emission characteristics of a diesel engine at different loads and constant engine speed. Compared with biodiesel, slightly lower brake specific energy consumption for triacetin and ethanol bended fuels was observed. At higher engine loads CO,HC and smoke emission were ...

Groundwater contamination by fuel spills from aboveground and underground storage tanks has been of growing concern in recent years. This problem has been magnified by the addition of oxygenates, such as ethanol and methyl-tertiary-butyl ether (MTBE) to fuels to reduce vehicular emissions to the atmosphere. These additives, although beneficial in reducing atmospheric pollution, may, however, in...

Hydrogen fuel is the cleanest fuel available. This fuel can be used as an additive in the diesel engine. Diesel engines have the advantages of strong power, high thermal efficiency and low fuel costs. There have been extensive studies on the use of hydrogen fuel in diesel engines in recent years. However, the simultaneous effect of using gaseous hydrogen fuel and changing injection strategy nee...

It is necessary to find a fuel source due to the heavy usage of natural resources. Developing countries have been trying various sources and methods to identify suitable alternative fuel for engines. This paper presents the utilization of Palm Oil Methyl Ester (POME) blends with diesel in Variable Compression Ratio (VCR) diesel engine. The performance and emission characteristics of biodiesel w...

Fuel additives incorporating nanosized ceria have been increasingly used in diesel engines as combustion promoters. However, few studies have assessed the impact of these nanotechnology-based additives on pollutant emissions. Here, we systematically compare emission rates of particulate and gaseous pollutants from a single-cylinder, four-cycle diesel engine using fuel mixes containing nanoceria...

various combustion characteristics and properties are studied while selecting a fuel for any engine. the choice of the engine and fuel are highly interrelated. vegetable oil is one obvious fuel particularly because their fuel properties are closer to diesel fuel. two important properties, the cetane number and the calorific value are similar to diesel. hence diesel engines can be operated on ve...

reduction of exhaust emissions is a major research task in diesel engine development in view of increasing concerns regarding environmental protection and stringent exhaust gas regulations. simultaneousreduction of nox emissions and particulate matter is quite difficult due to the soot/nox trade-off and isoften accompanied by fuel consumption penalties. towards this aim, automotive engineers ha...

A comprehensive study on the methanol as an alternative fuel has been carried out. A four stroke four cylinder diesel engine was adopted to study engine power, torque, break specific fuel consumption, break thermal efficiency and exhaust temperature with the fuel of fraction methanol in diesel. In this study, the diesel engine was tested using methanol blended with diesel at certain mixing rati...