Exergy analysis and response surface methodology (RSM) is applied to reduce the exergy loss and improve energy and exergy efficiency of acetic acid production plant. Exergy analysis is run as a thermodynamic tool to assess exergy loss in reactor and towers of acetic acid production process. The process is simulated in Aspen Plus(v.8.4) simulator and the necessary thermodynamics data for calcula...

An energy flow model of an airport terminal’s HVAC system is established in this paper. Based on energy flow model, the exergy efficiency, exergy loss and exergy cost distribution ratio of each component are calculated and analyzed by the energy flow model. Optimization method and exergy balance equations are used to calculate the lowest exergy loss of HVAC system under different operation cond...

In this work, we present the application of exergy analysis in the evaluation of the ethanol steam reforming (ESR) process in a catalytic membrane reactor (CMR) containing Pd-Ag membranes sandwiched by PdRh/CeO2 catalyst to produce fuel cell grade pure hydrogen (no sweep gas). ESR experiments were performed at T=873-923 K and P=4-12 bar. The fuel was a mixture of ethanol and distilled water wit...

This paper introduces the dual-mode refrigeration system for ice storage air conditioning. A computational model relating to the exergy loss amount and loss rate is developed in each component of the refrigeration cycle loop. A case study is presented to demonstrate the applicability of the model developed. Exergy analysis results of the refrigeration system in ice storage operating mode are co...

In this experimental work, ZnO nanoparticles were synthesized using the chemical precipitation method, and nanoparticle structure morphology characterized through XRD SEM. Heat transfer exergetic characteristics then studied in a shell tube heat exchanger PGW-based nanofluids varying volume concentration nanofluid (shell side) flow rate at 6, 8, 10 12 litres/min. The hot water was fixed results...

in this paper the energy and exergy analyses in chamber drying process of thin layer drying of tomato in a forced solar drying was investigated. the experiments were carried out with two thicknesses of 5 and 7 and two airflows 0.5 m.s-1 and 1 m.s-1. during the experimental process, ambient temperature was between 22 and 36 , air relative humidity between was 14 and 50, and solar radiation range...

In this study, the performance of an irreversible regenerative Brayton cycle is sought through power maximizations using finite-time thermodynamic concept in finite-size components. Optimizations are performed using a genetic algorithm. In order to take into account the finite-time and finite-size concepts in the current problem, a dimensionless mass-flow rate parameter is used to deploy ti...

Shell and tube heat exchangers are widely being used in many of industrial and power engineering applications. Different techniques have been employed in order to enhance the performance of the heat exchanger. Air bubble injection is one method to increase the turbulence of the flowing fluids which in turn enhance the heat transfer performance. Injecting air bubbles is one of the promising tech...

In order to evaluate and improve the performance of a ground-coupled heat pump (GCHP) heating system with radiant floors as terminals, an exergy analysis based on test results is performed in this study. The system is divided into four subsystems, and the exergy loss and exergy efficiency of each subsystem are calculated using the expressions derived based on exergy balance equations. The avera...

in this paper, first a sensitivity analysis of parameters affecting the performance of the steam generator is performed. this process includes the pinch temperature difference and the gas velocity (width of the hrsg) as the operating parameter and geometrical parameters (fin’s thickness, fin’s height, number of fins in each inch, tube transverse pitch) for each pressure parts is carried out, an...