Changes in fluidization behaviour of green peas particulates with change in moisture content during drying were investigated using a fluidized bed dryer. All drying experiments were conducted at 50 + 2 0C and 13 + 2 % RH using a heat pump dehumidifier system. Fluidization experiments were undertaken for the bedheights of 100, 80, 60 and 40 mm and at 10 moisture content levels. Fluidization beha...

In the present work a diffusion based model was adopted to represent the drying behaviour of pears in a continuous convective drier, taking into consideration the variation of the properties of the pears along drying. The program developed simulated a significant number of situations resultant from the variation of some of the operating conditions. The temperatures tested were 30, 40 and 50 C, ...

Spray dryers are of considerable importance in many industrial drying operations, yet their modelling has been relatively neglected. Here we present a summary of many years work performed at Sydney University investigating the fundamental flow behaviour in dryers and their modelling using a commercial CFD code. The key point to emerge is the need to perform three dimensional, transient calculat...

Changes in the physical properties (size, particle density, bulk density, shrinkage and porosity) and fluidization behaviour of cut green beans with change in moisture content during drying were investigated using a heat pump and fluidized bed dryers. Three length:diameter ratios 1:1, 2:1, 3:1 of cut green beans were considered. All drying experiments were conducted at 50 + 2 0 C and 13 + 2 % R...

The length scales of film thickness non-uniformities, commonly observed in polymer colloid (i.e. latex) films, are predicted. This prediction is achieved by investigating the stability behaviour of drying latex films. A linear stability analysis is performed on a base solution representing a uniformly drying latex film containing a surfactant. The analysis identifies film thickness non-uniformi...

This paper deals with thermal drying of wastewater sludges, whose management will become crucial in the forthcoming years. Sludges collected after mechanical dewatering in 5 different WWTPs are submitted to the same convective drying treatment in order to try finding some relations between the drying behaviours, the type of effluent and wastewater treatments. Results show dearly sludge drying r...

Aloe vera (Aloe barbadensis Miller) cubes of 12.5 × 12.5 × 12.5 mm thick were osmosed for 4 h in sugar syrup of 30, 40 and 50°Brix concentration and temperatures of 30 and 50°C at constant syrup to fruit ratio of 5:1. Osmosed and unosmosed aloe vera samples were hot air dried at 50, 60, 70 and 80°C with constant air velocity of 1.5 m/s. The water loss, solid gain and convective drying behaviour...

A simple formalism is presented to model the behaviour of expansive clays. Two levels of structure are considered. The behaviour of the macrostructure follows the model developed for unsaturated materials by Alonso et al. [Géotechnique 40 (3) (1990) 405–430]. The behaviour of the microstructure is adapted from the work of Gens and Alonso [Can. Geotech. J. 29 (1992) 1013–1032] in order to includ...