the effect of ferrite grain size on the fatigue and tensile properties of dual phase steels with a 0.25 volumefraction of martensite (vm) under different heat treatments was investigated. the heat treatments werehomogenized at 1200 oc along with several subsequent normalizations at 910 oc, resulting in differentmicrostructures and mechanical properties. after heat treatment, the obtained steels...

A quantitative and automated phase analysis of dual-phase (DP) steel using electron backscatter diffraction (EBSD) was attempted. A ferrite-martensite DP microstructure was produced by intercritical annealing and quenching. An EBSD map of the microstructure was obtained and post-processed for phase discrimination. Band slope (BS), which was a measure of pattern quality, exhibited much stronger ...

A microstructure consisting of ultrafine grained (UFG) ferrite with average grain size of ~ 0.7 µm and dispersed nano-sized carbides was produced by cold-rolling and tempering of the martensite starting microstructure in a low carbon steel. Subsequently, fine grained dual phase (DP) steel consisting of equiaxed ferrite grains with average size of ~ 5 µm and martensite islands with average size ...

The following nomenclature is used in this Chapter: a allotriomorphic ferrite aa acicular ferrite a w Widmanstatten ferrite ~ delta-ferrite !:i.0' increment in yield stress I austenite € true strain € true average strain €~ true plastic strain in softer phase of a dual-phase steel €~I true plastic strain in harder phase of a dual-phase steel €UTS true strain at ultimate tensile stress €y true s...

dual systems of steel moment frame and reinforced concrete shear wall have combined the advantages of steel frames and reinforced concrete shear wall. these walls have increased the lateral stiffness of steel frames and have reduced seismic demands on steel frames thus providing opportunities to use such system. in this research intermediate dual system of steel moment frame was chosen with int...

In this paper we present a new polynomial function for calculating the local phase transformation temperature (Ae3 ) between the austenite+ferrite and the fully austenitic phase fields during heating and cooling of steel:[Formula: see text] The dataset includes the terms of the function and the values for the polynomial coefficients for major alloying elements in steel. A short description of t...

The effect of ferrite grain size on the fatigue and tensile properties of dual phase steels with a 0.25 volume fraction of martensite (Vm) under different heat treatments was investigated. The heat treatments were homogenized at 1200 oC along with several subsequent normalizations at 910 oC, resulting in different microstructures and mechanical properties. After heat treatment, the obtained ste...

two different dual phase steels were prepared from low carbon manganese steel after the eliminationof the banding using the direct quenching (dq) and the step quenching (sq) procedures. different heattreatments resulted in different martensite morphologies, microstructures and mechanical properties. theheat treatments were designed in such a way to obtain a 0.25 volume fraction of martensite (v...