Researchers have developedmanymodels to simulate the elasto-plastic contact of spheres. However, there does not appear to exist a closed-form analytical model for elasto-plastic three-dimensional sinusoidal contact. This work uses a finite element model (FEM) to characterize elasto-plastic sinusoidal contact. Although at initial contact the sphere and sinusoidal case are very similar and can bo...

the development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. in petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. in this study, which is a...

The development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. In Petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. Studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. In this study, which is a...

in this research a new approach is proposed for elasto-plastic analysis of structures with truss elements. this method covers both perfectly plastic and hardening properties. the proposed technique uses substituting virtual loads instead of modifying the stiffness matrix. to solve this kind of problems, complementary programming is utilized. numerical examples demonstrate that elastoplastic ana...

This paper is on the elasto-plastic analysis of plane stress problems. A five-parameter yield surface is presented. This yield criterion uses associate flow along with mixed hardening rule. The analytical formulations are written and related computer program for non-linear analysis is prepared. Finally, based on the formulations, numerical examples are solved.

Indentation hardness has been used extensively for material characterization and many recent computational studies have established quantitative relationships between elasto-plastic mechanical properties and the response in instrumented indentation. In contrast, very few studies have systematically quantified the effect of the plastic deformation characteristics on the frictional sliding respon...

Abstract—In this paper, an analytical simplified method for calculating elasto-plastic stresses strains of notched bodies subject to non-proportional loading paths is discussed. The method was based on the Neuber notch correction, which relates the incremental elastic and elastic-plastic strain energy densities at the notch root and the material constitutive relationship. The validity of the me...

A comprehensive computational study was undertaken to identify the extent to which elastoplastic properties of ductile materials could be determined from instrumented sharp indentation and to quantify the sensitivity of such extracted properties to variations in the measured indentation data. Large deformation finite element computations were carried out for 76 different combinations of elasto-...

Due to the nonlinear nature of the inter-particle contact, granular chains made of elastic spheres are known to transmit solitary waves under impulse loading. However, the localized contact between spherical granules leads to stress concentration, resulting in plastic behavior even for small forces. In this work, we investigate the effects of plasticity in wave propagation in elasto-plastic gra...

Elasto-plastic mechanical deformation behaviors of c-plane (0001) and nonpolar GaN single crystals are studied using nanoindentation, cathodoluminescence, and transmission electron microscopy. Nanoindentation tests show that c-plane GaN is less susceptible to plastic deformation and has higher hardness and Young's modulus than the nonpolar GaN. Cathodoluminescence and transmission electron micr...