Cold rolling of austenitic stainless steel results in increase of residual stresses, hardness, and tensile strength and dislocation density. We have studied the response of eddy current impedance to austenitic change, hardness and its lift off phase in stainless steels during cold reductions. A series of samples of austenitic stainless steel alloys were cold rolled and found that only percentag...

One of the critical issues for the application of iron aluminide coatings is the loss of Al from the coating into the Fe-base substrate alloys which do not contain aluminum. The interdiffusion behavior between chemical vapor deposited (CVD) aluminide coatings and ferritic and austenitic substrates is being studied for times up to 10,000h in the temperature range of 500-800oC. Coatings were synt...

The load partitioning between the two phases in a cold rolled duplex stainless steel sheet have been experimentally studied in situ during loading, via X-ray diffraction, for different loading directions. The microstresses in the two phases were found to decrease when loading in the transverse direction, while they increase during loading in the rolling and 45°-direction. Due to strong crystall...

Many of the degradation mechanisms relevant to power plant components can be exacerbated by stresses that reside within the material. Good design or structural integrity assessments require therefore, an accounting of residual stresses, which often are introduced during welding. To do this it is necessary to characterise the stresses, but this may not be possible in thick components using non-d...

In the present study, the microstructure and mechanical properties of the dissimilar welding between ASTM A335 low alloy steel and ER309L austenitic stainless steel were investigated using the gas tungsten arc welding process. The welding of dissimilar materials between ASTM A335 low alloy steel and ER309L austenitic stainless steel was found to have a significant effect on the microstructure w...

Implantation using stainless steels (SS) is an example where an understanding of protein-induced metal release from SS is important when assessing potential toxicological risks. Here, the protein-induced metal release was investigated for austenitic (AISI 304, 310, and 316L), ferritic (AISI 430), and duplex (AISI 2205) grades in a phosphate buffered saline (PBS, pH 7.4) solution containing eith...