The biaxial flexural strength and cyclic fatigue biaxial flexural strength of CAD/CAM ceramics polished with #220, 400, 600 and 1000 diamond pads were measured in an effort to determine the effect of surface roughness on fatigue behavior of dental ceramics. The surface roughness was improved after polishing with a smaller diamond grain pad. The flexural strengths of the specimens polished with ...

The purpose of the present study was to evaluate the relationships among three flexural strengths of recent dental ceramics using 3-point and 4-point bending tests and biaxial flexural test. Three brands of porcelain for veneering (d.SIGN, Supper porcelain AAA, Vintage Hallo), two injectable ceramics (Empress 2, OPC 3G), and one castable ceramic (Crys-Cera) were used. Twenty bar-shaped and 10 d...

With the vast potential of micro-electro-mechanical systems (MEMS) technology, the reliability is essential for the successful applications of microdevices. Polycrystalline silicon is one of the most often used structural materials in microdevices. Tension testing for fatigue life of this material has been investigated since past years. This paper presents a micro-actuatorbased bending testing ...

BACKGROUND Techniques for the skeletal attachment of amputation-prostheses have been developed over recent decades. This type of attachment has only been performed on a small number of patients. It poses various potential advantages compared to conventional treatment with a socket, but is also associated with an increased risk of bone or implant-bone interface fracture in the case of a fall. We...

in this study, the strain rate effect on the bending properties of fiber reinforced composites for three types of polymer composites namely phenolic resin reinforced by woven basalt fibers, woven carbon fibers, and woven basalt/ woven carbon fibers at a total volume fraction of approximately 35% has been determined. flexural tests have been conducted at low range of strain rates included 0.03 m...

Many structures are often prone to bending loads, which can result in serious damage. Therefore, for structural integrity, structures must be efficient to resist bending. Flexural loading causes stresses in the composites, which vary through the thickness. These flexural stresses are the maximum at the outer surfaces and zero in the middle at the neutral axis. In pure bending, the composite fai...

The objective of this work is two-fold. First, we attempt to fit the experimental data on the flexural fatigue of plain and fiber-reinforced concrete with a probabilistic model (Saucedo, Yu, Medeiros, Zhang and Ruiz, Int. J. Fatigue, 2013, 48, 308-318). This model was validated for compressive fatigue at various loading frequencies, but not for flexural fatigue. Since the model is probabilistic...

Based upon the statistical distribution of flexural fatigue life data and flexural fatigue strength of the steel fibre reinforced concrete (SFRC) containing blends of limestone powder (LP) and silica fume (SF), the influence of these inserts on the flexural fatigue performance of concretes is probed. Concrete mixes were proportioned to replace 30% cement with these mineral inserts in different ...

In addition to the surface quality and appearance, near scanning strategy has an influence on porosity beneath of LBPF manufactured 316L parts. Furthermore, this will fatigue life part which be pronounced a flexural bending type fatigue. work, effect edge was analyzed by optical microscopy measured with tests. The results showed that had clear impact limit improved 30 % 250 MPa simple parameter...

COMPARISON BETWEEN THREE-POINT AND FOUR-POINT FLEXURAL TESTS 2 TO DETERMINE WOOD STRENGTH OF EUCALYPTUS SPECIMENS 3 Paulo Ricardo Gherardi HEIN*, Loïc BRANCHERIAU 4 *Corresponding author: [email protected] 5 Received: September 21, 2016 6 Accepted: January 24, 2018 7 Posted online: January 25, 2018 8 9 ABSTRACT 10 11 Comparison between flexural wood strength values obtained from three-poin...