-This paper studies several kinetic aspects of semi-batch flotation of celestite and calcite in a mechanical or subaeration cell with sodium oleate as the collector agent, using pure minerals ranging in size between 177 and 74 pm, respectively, with a constant pH = 9 in the flotation bath in all experiments. The results obtained indicate that both minerals float rapidly and that the flotation r...

The effect of impeller speed on the air flow in a selfaerated Denver laboratory flotation cell was investigated using computational modelling. Air is induced into the slurry by the impeller’s rotating action. The rate of air flow is determined by the suction pressure created by the impeller, the hydrostatic head of the slurry and the frictional losses along the delivery shaft from the inlet val...

This paper studies several kinetic aspects of flotation of celestite and calcite in a mechanical cell with sodium dodecylsulphate as the collector agent, using pure minerals ranging in average particle size between 137 and 74 mm, respectively, with a constant pH 3 in the flotation bath in all experiments. The results obtained indicate that both minerals float rapidly and that the flotation rate...

This study investigates the flotation performance of a representative hard coal slime sample (d80 particle size of minus 0.2 mm) obtained from the Prosper-Haniel coal preparation plant located in Bottrop, Germany. Flotation was carried out with a newly designed flotation cell refurbished from an old ultrasonic cleaning bath (2.5 L volume) equipped with a single frequency (35 kHz) and two differ...

Flotation is a complex process that exhibits high dimensionality which makes modeling and optimization very challenging. One technique to alleviate the problem combine variables together into more informative ones. Bubble surface area flux air recovery are examples of reduction. Gas holdup also captures effect plurality including gas rate, bubble size, surfactant type, concentration. This work ...

A study was carried out to determine the effect of water quality on flotation performance. The experimental test work comprised of batch flotation tests using Denver lab cell for a period of 10 minutes. Nine different test runs were carried out in triplicates to ensure reproducibility using different water types from different thickener overflows, return and sewage effluent water (process water...

Rubinstein J (1995) Cohtmn Flotation: Processes, Designs and Practices. New York: Gordon and Breach. Schubert Hand Bischofberger C (1979) On the optimization of hydrodynamics in flotation processes. In: Laskowski J (ed.) Proceedings of the 13th International Mineral Process Congress, pp. 1261-1287. Warsaw: Elsevier. Wills BA (1992) Introduction to Mineral Processing Technology, 5th edn, pp. 558...

The effects of a chelating surfactant and different foaming agents on the efficiency of cleaning process waters from a thermomechanical pulp (TMP) mill were studied in a Voith flotation cell. Turbidity measurements and gas chromatography were used to determine the removal extent and characteristics of dissolved and colloidal substances (DisCo). The metal ion content in the process waters before...

The influence of conditioning on the flotation of pyrrhotite in the presence of chlorite was investigated through flotation tests, sedimentation tests, and X-ray photoelectron spectroscopy (XPS) analysis. The flotation results show that chlorite slimes dramatically impair the flotation of pyrrhotite. Sedimentation and flotation tests reveal that conditioning can effectively remove chlorite slim...

partially replace oil and natural gas as fuel sources. Of all the coal-cleaning pmesses, flotation is one. of the most versatile. Carbon dioxide coal flotation is a new technology developed at the University of Utah.(l) Compared with conventional flotation, carbon dioxide flotation enhances the ash rejection and increases flotation recovery for coals of different rank with the exception of lign...