The aim of the present study is the prediction of critical conditions (including critical strain and flow stress) for the initiation of dynamic recrystallization during thermo-mechanical processing of plain carbon steels. For this propose, torsion tests were conducted at different temperature (1050, 1100 and 1150˚C) and strain rates (0.002, 0.02 and 0.2/s). All flow curves showed a peak st...

the hot compression tests were carried on x45crniw189 valve steel (x45) in the temperature rangeof 1000– 1200 °c and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperaturesoftening behavior of this steel. for the exact prediction of flow stress, the effective stress-effectivestrain curves were obtained from experiments under various conditions. on the basis of experimen...

high weissenberg boundary layer flow of viscoelastic fluids on a stretching surface has been studied. the flow is considered to be steady and two dimensional. flows of viscoelastic liquids at high weissenberg number exhibit stress boundary layers near walls. these boundary layers are caused by the memory of the fluid. upon proper scaling and by means of an exact similarity transformation, the n...

In hot forming process, the workpiece undergoes plastic deformation at high temperature and the microstructure of the workpiece changes according to the plastic deformation. These changes affect the mechanical properties of workpiece. In order to optimize this process, both the plastic deformation of workpiece and its microstructural changes should be taken into consideration. Since material be...

In hot forming process, the workpiece undergoes plastic deformation at high temperature and the microstructure of the workpiece changes according to the plastic deformation. These changes affect the mechanical properties of workpiece. In order to optimize this process, both the plastic deformation of workpiece and its microstructural changes should be taken into consideration. Since material be...

many efforts have been made to model the the hot deformation (dynamic recrystallization) flow curves of different materials. phenomenological constitutive models, physical-based constitutive models and artificial neural network (ann) models are the main methods used for this purpose. however, there is no report on the modeling of warm deformation (dynamic spheroidization) flow curves of any kin...

the flow stress of steel depends significantly on microstructural changes taken place during hot deformation processes. in hot deformation processes, the flow stress of steel is influenced by two main metallurgical phenomena, i.e. recovery and recrystallization, along with its chemical composition and thermo-mechanical parameters. the final mechanical properties of steel are also determined by ...

the effect on sugar beets of water and nitrogen movement in the soil under different water conditions was assessed over two years (2000-1) at the khorasan agricultural research center. three water treatments (no water stress, continuous stress and primary stress) and three n amounts (80, 160 and 240 kg n/ha) were investigated. the amount of moisture depletion in the water treatments was 50%, 80...

this paper addresses the combined effects of couple stresses, thermal radiation, viscous dissipation and slip condition on a free convective flow of a couple stress fluid induced by a vertical stretching sheet. the cogley- vincenti-gilles equilibrium model is employed to include the effects of thermal radiation in the study. the governing boundary layer equations are transformed into a system o...