functionally graded aluminium/zirconia metal matrix composite was fabricated using stir casting technique followed by horizontal centrifugal casting process and a hollow cylindrical functionally graded composite (150 x 150 x 16 mm) was obtained with centrifuging speed of 1200 rpm. the microstructural evaluation and hardness test was carried out on the outer and inner surface of the functionally...

The thermal barrier coatings (TBCs) by gas tunnel-type plasma spraying exhibited ceramic-composite features consisting of a host oxide matrix ceramic with an embedded second phase material. The densities of the composite TBC were found to be higher than those sprayed with 100wt% ZrO2 or Al2O3. In the coatings produced with powder mixtures of 50wt%, the embedded splats are found to have a relati...

Surface modification on Mg alloys is highly promising for their application in the field of bone repair. In this study, a new metal-organic framework/MgF₂ (Mg-MOF-74/MgF₂) composite coating was prepared on the surface of AZ31B Mg alloy via pre-treatment of hydrofluoric acid and in situ hydrothermal synthesis methods. The surface topography of the composite coating is compact and homogeneous, an...

In previous study, dense and homogenous 20wt% HAP/Ti composite coatings were successfully deposited on Ti substrates by cold gas dynamic spray technique. The results revealed that the phase composition of the HAP in the deposit is identical to that of the precursor powder and the bonding strength of the deposit is comparable/better to that of the plasma sprayed HAP. A relatively higher corrosio...

Calcium silicate (CS) ceramic is a good coating candidate for biomedical implants to improve biocompatibility and accelerate early osseointegration. However, the poor fracture toughness and wear resistance of this ceramic material restricts the long-term performance of implants. In this study, graphene plates (GPs) were used as reinforcement to improve the mechanical properties of CS coating. C...

A gradient composite coating on the surface of titanium materials, which are used in dental implants, is prepared using an electric-chemical method. The physical properties of the composite coating and its strength of combining with titanium material are studied by the scanning electron microscope, energy dispersive spectrum and X-ray diffraction analysis, etc. The results show that the nanohyd...

Collagen and apatite were coprecipitated as a composite coating on poly L-lactic acid (PLLA) in an accelerated biomimetic process. The incubation solution contained collagen (1 g/L) and simulated body fluid with 5 times inorganic ionic concentrations as human blood plasma. The coating formed on PLLA films and scaffolds after a 24-h incubation was characterized by using energy-dispersive X-ray s...

Two coatings have been developed for petrochemical compressor antifouling and corrosion resistance purposes. One is a multilayer composite coating with a modified polytetrafluoroethylene (PTFE) impregnated organic topcoat, which gives it superior antifouling performance to the similar coating that has been used by the compressor original equipment manufacturers (OEMs). The other is a high-phosp...

Synthesis of functionally gradient coating was the main goal of researches to cover some deficiencies of metallic coatings. In this study, a new strategy for generating functionally gradient coatings of nickel-chromium on a carbon steel substrate using pulse electrodeposition has been presented. The gradual changes of the duty cycle and pulse frequency were used to generate the functionally gra...

in the present study, ni-p-cnt composite coating was successfully fabricated via electroless plating. scanning electron microscopy (sem) was used to characterize the coatings. the effect of cnts concentration in the bath on its content in the composite coatings was studied. furthermore, the corrosion behaviour of the coatings with different contents of cnts was evaluated using tafel polarizatio...