The girder of self-anchored suspension bridge is subjected to large compression force applied by main cables. So, serious damage of the girder due to breakage of hangers may cause the collapse of the whole bridge. With the time increasing, the hangers may break suddenly for their resistance capacities decrease due to corrosion. Using nonlinear static and dynamic analysis methods and adopting 3D...

A concrete bridge over Interstate 70 east of Denver, Colorado was impacted by a fork lift being transported by a truck moving at a speed of approximately 75 mph. The forklift impacted the east face of the prestressed concrete I-beam bridge girder, resulting in severe cracking and concrete spalling on both sides of the eastmost girder. Polymer-modified repair mortar was used to repair spalled ar...

Continuous rigid frame bridge is a common type of bridge in California, where is a seismically active areas. Main structural features of the bridge, including asymmetry, hinge structure, concretion of girder and piers affect the seismic response of the bridge significantly. In order to evaluate the safety of the bridge under earthquake, the nonlinear models of girder, limiting steels in hinge, ...

Lamb waves in plates and in cylindrical pipes have been the subject of extensive study, largely because they propagate great distances with little attenuation, and can therefore be used to detect flaws. In this paper we report finite element simulations and experimental studies of Lamb waves in steel bridge girder geometries. In our studies the Lamb waves are generated by PZT wafer-type transdu...

Based on the conceptions of energy dissipation, multi-failure and safety protection of structure, a new energy dissipation-based multi-level control system for unseating failure prevention of concrete girder bridges subjected to earthquake is proposed. The control system provides respectively two different functions including energy dissipation-based displacement restriction and unseating preve...

double bridge girder overhead cranes are used for heavy duty applications in theindustry. in this paper a detailed parametric design optimization of the main girder of box type isperformed for a 150ton capacity and 32m long span crane, after its basic design using availabledesign rules. design optimization is performed using detailed 3d finite element analysis bychanging the number, shape and l...

It has been argued that the AASHTO LRFD design code for maximum live loads on highway bridges is overly conservative. In an attempt to determine the level of conservativeness, if any, the writers developed a methodology incorporating real-time visual data collection from traffic cameras coupled with structural strain response of girder bridges. Average daily truck traffic along with frequency o...

Differential settlement of the foundation of the LCLS Undulator Hall will cause quadrupoles to move and the electron beam trajectory to distort. The resulting phase errors will decrease the FEL power and require time consuming beam-based alignment sessions to correct. By supporting quadrupoles on girders, with three quadrupoles to a girder, the foundationmotion induced phase error between the b...

In this paper the parametric study is carried out to investigate the effect of number of cells in optimal cost of the non-prismatic reinforced concrete (RC) box girder bridges. The variables are geometry of cross section, tapered length, concrete strength and reinforcement of the box girders and slabs that are obtained using ECBO metaheuristic algorithm. The design is based on AASHTO standard s...

Abstract: Aerodynamic admittance is a key parameter affecting the analysis accuracy of the bridge buffeting response. However, few articles have covered the issue of the wide-body flat box girder with much smaller depth-width ratio (such as 1/12 studied in this paper). Therefore, to explore the real buffeting force of the wide-body flat box girder, experiments of the static force coefficients a...