Aesthetic requirement of severely mutilated primary anterior teeth in the case of early childhood caries has been a challenge to pediatric dentist. Among restorative treatment options, prefabricated crown and biological and resin composite restoration either by means of direct or indirect technique are mentioned in the literature. This paper presents the clinical sequence of rehabilitation of m...

Results of an investigation of the mechanical performance of injection moulded long glass-fibre reinforced polyamide 6,6 composites are presented. The glass-fibre content in these composites was varied over the range of 10-50% by weight using fibres with average diameters of 10, 14 and 17 μm. Impact testing was carried out at -40, 23 and 80°C on dry-as-moulded and boiling water conditioned samp...

Abstract In dentistry, the use of dental fillings is a routine procedure. The cheap, simple and low-harm operation, however, filling deep cavities difficult task. During this research, three types were tested: composite bonded directly to cavity walls, walls with semi-direct method, lined polyethylene fibres. course our examinations, gaps between wall observed using scanning electron microscopy...

Glass Fibre Reinforced Concrete is recent introduction in the field of concrete technology. The present day world is witnessing the construction of very challenging and difficult Civil Engineering Structures. Concrete being the most important and widely used material is called upon to possess very high strength and sufficient workability properties. Concrete the most widely used consrtuction ma...

Composite materials are finding increasing application in mechanical systems because of their desirable physical characteristics compared with metals; for example, high strengthand stiffness-to-weight ratios, and the potential for constructing complex shapes without joints or extensive machining. In addition, the dynamic behaviour of composite structures can be manipulated by judicious selectio...

Composite resins were reinforced with glass and polyethylene fibers in this study, and the effect of fiber reinforcement on the color change of composite resins was investigated. After accelerated aging, the effect of fiber reinforcement on the color stability of composite resins was also examined. There were three experimental groups (n=12 disks per group): non-fiber-reinforced composite (non-...

A surface-mounted chirped fibre Bragg grating (CFBG) sensor has been used for the first time to monitor delamination growth within a composite material (a transparent, unidirectionally reinforced glass fibre/epoxy resin double-cantilever beam (DCB) specimen). The specimens were tested using a constant displacement rate, with the delamination length being measured using complementary techniques:...

In the present study, core-reinforced braided composite rods (BCRs) were developed and characterized for strain sensing capability. A mixture of carbon and glass fibre was used in the core, which was surrounded by a braided cover of polyester fibres. Three compositions of core with different carbon fibre/glass fibre weight ratios (23/77, 47/53, and 100/0) were studied to find out the optimum co...

Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...