Introduction The aim of this study was to evaluate & compare the wetting ability of five saliva substitutes & distilled water on heat-polymerized acrylic resin. Contact angle of the saliva substitute on denture base can be taken as an indicator of wettability. Good wetting of heat-polymerized acrylic resin is critical for optimum retention of complete dentures. Methods Two hundred & forty sam...

Statement of problem: Fracture strength of a denture base resin is of great concern, and many approaches have been used to strengthen acrylic resin dentures. Purpose: The aim of this study was to measure the transverse strength of a heat polymerized acrylic resin, after reinforcement with metal wire and two types of glass fibers. Materials and Methods: Forty rectangular specimens (65.0×10.0×3.3...

o bjectives: heat-polymerized acrylic resin has been the most commonly used denture base material for over 60 years. however, the mechanical strength of acrylic resin is not adequate for long-term clinical performance of dentures. consequently, fracture is a com- mon clinical occurrence, which often occurs in the midline of denture base.this study aimed to evaluate the efficacy of cold cure and...

This study evaluated water sorption in heat-polymerized acrylic resins processed in monomaxillary flasks by water bath and in bimaxillary flasks by microwave energy and water bath. Fifty heat-polymerized acrylic resin specimens were fabricated according to the 12th specification of the American Dental Association and assigned to 3 groups: group 1 was processed by water bath in monomaxillary met...

The purpose of this study was to assess the antimicrobial efficacy of a peracetic acid-based disinfectant for decontamination of heat-polymerized, chemically activated and microwave-polymerized acrylic resins. Resin plates were contaminated in vivo upon intraoral use by 10 volunteers for 7 nights and slabs were contaminated in vitro by contact with Bacillus subtilis and Bacillus stearothermophi...

PURPOSE The discoloration of acrylic resin denture bases may lead to significant esthetic problems. The aim of this in vitro study was to investigate the effects of frequently consumed drinks on the color changes of fresh and aged, heat-polymerized, conventional acrylic resin. MATERIALS AND METHODS Eighty-four, heat-polymerized acrylic resin specimens (4 mm x 5 mm x 30 mm) were fabricated. Ha...

BACKGROUND The aim of this study was to evaluate and compare the porosities in the mandibular acrylic denture bases processed by heat and microwave polymerization techniques, using two different brands of commercially available denture base resins. MATERIALS & METHODS Two brands of heat activated denture base resins, DPI plain and Acralyn H cross linked denture base resins designed for conven...

The purpose of this study is to compare the flexural strength values of four different methods for chair side direct transfer methods of implant housing. Materials and Methods: Sixty heat-cured polymethylmethacrylate denture blocks were prepared of size 11 (±0.5) x 8 (±0.5) x 38(±0.5) mm. At the centre a hole of 5mmx8mm dimension was made to secure the implant housing.The Implant Housings were ...

Purpose: Acrylic dentures frequently fracture during service due totheir poor strength characteristics. The aim of this study was to evaluate the effects of adding 5%, 10% and 15% aluminum oxide powder on the flexural strength, surface hardness of a conventional heat-polymerized acrylic resin. Materials and methods: One of the commonly used conventional heat cure denture base resin (DPI) and hi...

Despite the large number of studies addressing the effect of microwave polymerization on the properties of acrylic resin, this method has received limited clinical acceptance. This study evaluated the influence of microwave polymerization on the flexural strength of a denture base resin. A conventional heat-polymerized (Clássico), a microwave-polymerized (Onda-Cryl) and a autopolymerizing acryl...