This paper describes recent experiments to investigate the effects that the location of a fire within an enclosure has upon the rate of heat release. A series of pool fire experiments in a 1⁄2 domestic scale compartment using three ventilation geometries (fully open, soffit, and door), and heptane pool fires located in three evenly distributed locations within the compartment (rear, centre and ...

a sustained-release tablet formulation should ideally have a proper release profile insensitive to moderate changes in tablet hardness that is usually encountered in manufacturing. in this study, matrix aspirin (acetylsalicylic acid) tablets with ethylcellulose (ec), eudragit rs100 (rs), and eudragit s100 (s) were prepared by direct compression. the release behaviors were then studied in two co...

in the present investigation an attempt has been made to increase therapeutic efficacy, to reduce frequency of administration and to improve patient compliance by developing a sustained release matrix tablets of isosorbide-5-mononitrate. sustained release matrix tablets of isosorbide-5-mononitrate were developed by using different drug: polymer ratios, such in f1 (1:0.75), f2 (1:1), f3 (1:1.5),...

In this study, heat release performances of the three extruded-type heat sinks can be used in inverter for solar power generation were evaluated. Numbers of fins in the heat sinks (namely E-38, E-47 and E-76) were 38, 47 and 76, respectively. Heat transfer areas of them were 1.8, 1.9 and 2.8m. The heat release performances of E-38, E-47 and E-76 heat sinks were measured as 79.6, 81.6 and 83.2%,...

The relationship between heat release rate and other fire reaction properties of fibre reinforced polymer composite materials is investigated. The heat release rate and fire reaction properties of thermoset matrix composites reinforced with combustible fibres (aramid, extended-chain polyethylene) or non-combustible fibres (glass, carbon) were determined over a range of heat flux levels using th...

Experiments were conducted to study the effects of heat release in a planar, gas-phase, reacting mixing layer formed between two free streams, one containing hydrogen in an inert diluent, the other, fluorine in an inert diluent. Sufficiently high concentrations of reactants were utilized to produce adiabatic flame temperature rises of up to 940 K (corresponding to 1240 K absolute). The temperat...

The phenomenon of combustion driven oscillations has long held the interest of scientists and engineers. According to the so-called Rayleigh criterion [1], driving of the pressure oscillations occurs if the periodic heat release rate is generally coincident with the pressure oscillations. The main mechanisms involved are considered to be both thermoacoustic and vortical in nature [2-5]. Useful ...

fire behavior of different types of eps was evaluated with the use of iso 5660 cone calorimeter test method. considering the complexity of behavior of eps against high temperatures, several specimens were tested, so a betterjudgment on fire behavior of this material could be acquired. the effects of foam density, thickness of specimens and the level of heat flux on fire behavior of foam were ex...