Zero-current (ZC) switching pulse-widthmodulated (PWM) flyback DC-DC converter is an extended version of the single switch flyback converter with an additional active circuit. The purpose of the active circuit is to turn-off the main switch with zero-current switching (ZCS) condition to reduce the turn-off switching loss. This paper presents an overview of the ZCS flyback PWM DCDC converters. T...

A non-isolated DC/DC converter with high transfer gain is proposed in this paper. The presented converter consists of the switched inductor and three-level converters. The DC/DC power converter is three-level boost converter to convert the output voltage of the DC source into two voltage sources. The main advantages of DC/DC converter are using low voltage semiconductors and high gain voltage. ...

In this paper, analysis, design and implementation of non-isolated soft-switching bidirectional DCDC converter with an active switch are described. The proposed topology gives the output voltage as twice as the input voltage and enhances the efficiency up to 94.5% and 92.9% for boost and buck mode operation by proper selection of the duty cycle. Soft switching can be achieved at both steps up a...

In this paper, a comparative analysis on the bifurcative and chaotic behaviour of a current controlled buckboost converter with soft switching and hard switching is performed. The electromagnetic interference generated during hard switching and soft switching of the converter is analyzed. Simulation and measured results show that the total energy is more evenly spread over the frequency band du...

Fuel cells are new alternative energy resource that has a great promise for distributed generation and electric vehicle application. However, fuel cells have a slow response due to their slow internal electromechanical and thermodynamic response. To optimize the fuel cell system performance, a fuel cell DC-DC converter with an appropriate controller which can regulate the power flow and automat...

This paper presents the design of simple but powerful soft switching scheme for a DCDC Boost Converter with a closed loop control. A new novel soft switching scheme is proposed with a single switch and minimum components which offers load independent operations. The only switch used in this converter is switched ON at zero current and switched OFF at zero voltage .The proposed Controller is use...

Wearable devices require power management systems to achieve high conversion efficiency over a wide range of load currents. Multi-mode mixed modulation can be used in DCDC converters current range. The boost converter proposed this paper uses hybrid DGM (Deep Green Control Mode), PCMC (Peak mode control)-PFM (Pulse Frequency Modulation) and PCMC-PWM Width Modulation). switches smoothly from PCM...