In hot forming process, the workpiece undergoes plastic deformation at high temperature and the microstructure of the workpiece changes according to the plastic deformation. These changes affect the mechanical properties of workpiece. In order to optimize this process, both the plastic deformation of workpiece and its microstructural changes should be taken into consideration. Since material be...

strain induced precipitation in hsla-100 steel was investigated by conducting hotcompression and relaxation tests at temperature range of 850°c to 1100°c and strain rate of 0.001s-1 to 1s-1. the absence of dynamic recrystallization at temperatures below 1000°c was attributedto the influence of dynamic precipitation. the stress relaxation tests showed that strain inducedprecipitation is possible...

The hot deformation behavior of a typical martensitic stainless steel containing 2.1% Ni was investigated by means of the compression test in the strain rate range of 0.001-1 s-1 and temperature range of 950-1150 °C. The flow behavior of the steel was evaluated using the flow stress curves and flow softening map and by microstructural investigation. Taking into account of the strain effect on t...

many efforts have been made to model the the hot deformation (dynamic recrystallization) flow curves of different materials. phenomenological constitutive models, physical-based constitutive models and artificial neural network (ann) models are the main methods used for this purpose. however, there is no report on the modeling of warm deformation (dynamic spheroidization) flow curves of any kin...

Abstract Hastelloy C276 is widely used in the new generation of nuclear power plants, and hot deformation optimum way to form part. In this investigation, constitutive modeling alloy are researched, processing maps drawn. The results show that strain rate temperature have remarkable impacts on behaviors alloy. yield behavior flow stress predicted based Arrhenius equation, correlation coefficien...

the hot compression tests were carried on x45crniw189 valve steel (x45) in the temperature rangeof 1000– 1200 °c and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperaturesoftening behavior of this steel. for the exact prediction of flow stress, the effective stress-effectivestrain curves were obtained from experiments under various conditions. on the basis of experimen...