Perfluorinated-sulfonic-acid-based ionomers (PFSAs) are still the material of choice for electrochemical energy devices such as proton-exchange membrane fuel cells or water electrolyzers. However, PFSAs show significant drawbacks ranging from a restricted temperature window operation due to insufficient thermomechanical stability, high cost, and questionable environmental properties. Recently, ...

Sulfonated poly (ether ether ketone) (SPEEK) with a low degree of sulfonation (DS = 40%) was prepared for proton exchange membrane fuel cells (PEMFC). Poly (ether ether ketone) (PEEK) was sulfonated in concentrated H2SO4 under N2 atmosphere and characterized by the hydrogen nuclear magnetic resonance (H-NMR) technique. After preparation of the SPEEK polymer, the obtained polymer was dissolved i...

Heterogeneous proton exchange membranes (PEM) are synthesized using the dry phase inversion technique. The casting solutions are prepared by dispersing a finely ground cation exchange resin particle in N,N-dimethylacetamide (DMAc) solution of polyvinyl-chloride (PVC). Results show that ion exchange capacity is increased with the addition of 1 %-wt nanosilica (from 0.14 to 0.27 meq/g) while it i...

The proton conductivity and oxidation resistance as well as dimensional stability of hydrocarbon proton exchange membranes were simultaneously improved, achieving exciting overall properties.

In this paper, the silicon-containing sulfonated polystyrene/acrylate–ionic liquid (Si-SPS/A–IL)hybrid membranes was prepared to obtain the proton exchange membrane (PEM) materials withhigh methanol barrier and good selectivity. The Si-SPS/A–IL hybrid membranes characterized asthe function of IL to evaluate their potential as PEMs in direct methanol fuel cells (DMFCs).Fourdifferent Hybrid mater...

in this paper the role of super paramagnetic iron oxide nanoparticles (spi) on platinum nanoclusters on activated carbon (pt/c) for electrocatalytic oxygen reduction reaction was considered. four composites of pt/c and super paramagnetic iron oxide nanoparticles were prepared with the same total composites weight and different loading of pt/c (1.2, 0.6, 0.4 and 0.3 mg ). the composite attached ...

reduced graphene oxide film was synthesized on a glassy carbon electrode by electro reduction of graphene oxide powders in aqueous solution. then platinum nano particles were deposited on reduced graphene oxide film that was deposited on the glassy carbon electrode via electro reduction of platinum salt. the physical morphology of the platinum on reduced graphene oxide film was evaluated by sca...

An important building block of a new sustainable energy infrastructure is the transition of the transportation sector from inefficient internal combustion engines towards electric drives. Proton exchange membrane fuel cells (PEMFCs) are promising power sources since they can generate electricity from the electrochemical oxidation of a fuel, e.g. hydrogen or methanol, which would provide higher ...