In this work, the suitability of several techniques for monitoring a reverse-flow reactor system are studied. Reverse reactor systems are operated by periodically reversing the direction of the flow inside the reactor [1],[2]. One benefit of a reverse-flow configuration is that, for exothermic reactions, the system exhibit a heat-trap effect [3] where the temperature profile across the reactor ...

Fat-containing food waste can be effectively treated in a new type of reactor, the so-called BIOPAQ-Anaerobic Flotation Reactor or BIOPAQ(®) anaerobic flotation reactor (AFR). In the reactor a flotation unit is integrated to retain the sludge. In this study results from two plants with a 430 and 511 m(3)-AFR, respectively, are presented. In one reactor, which is fed with water originating from ...

The threat of bacterial contaminants in water distribution systems and in the environment is of unremitting concern for environmental engineers. This problem is compounded by the overuse of antibiotics and the resulting increased prevalence of antibiotic resistant pathogens in engineered waste streams and hospital wastewater effluents. Through defects in sewer systems these pathogens are furthe...

Partial nitrification techniques, such as the continuously aerated SHARON process, have been denoted for quite a while as very promising for improved sustainability of wastewater treatment. Combination of such a SHARON process with the Anammox process, where ammonium is oxidised with nitrite to nitrogen gas under anoxic conditions, leads to cost-efficient and sustainable nitrogen removal from c...

Exergy analysis and response surface methodology (RSM) is applied to reduce the exergy loss and improve energy and exergy efficiency of acetic acid production plant. Exergy analysis is run as a thermodynamic tool to assess exergy loss in reactor and towers of acetic acid production process. The process is simulated in Aspen Plus(v.8.4) simulator and the necessary thermodynamics data for calcula...

During its near-ground hovering phase a Short Take-Off and Vertical Landing (STOVL) aircraft creates a complex three-dimensional flow field between jet streams, the airframe surface and the ground. A proper understanding and numerical prediction of this flow is important in the design of such aircraft. In this paper an experimental facility, used to gather validation data suitable for testing C...

This contribution deals with the behaviour of a SHARON reactor for nitrogen removal from wastewater streams with high ammonium concentrations. A system analysis is performed on a two-step nitrification model, describing the behaviour of such a reactor. Steady states are identified through direct calculation using a canonical state space model representation. Practical operation of a SHARON reac...