the effect of welding residual stresses that was created in thin infill plate of steel plate shear wall system during constructional processes was studied in this research. residual stresses in a welded structure is the result of the non-uniform expansion and contraction and plastic deformation of the weld and surrounding base metal due to heating and cooling cycle, during welding process, this...

This paper describes the prototype design, specimen design, experimental setup, and experimental results of three light-gauge steel plate shear wall concepts. Prototype light-gauge steel plate shear walls are designed as seismic retrofits for a hospital structure in an area of high seismicity, and emphasis is placed on minimizing their impact on the existing framing. Three single-story test spe...

In the building construction, framed structures are frequently used due to ease of construction and rapid progress of work. Masonry infill panels have been widely used as interior and exterior partition walls for aesthetic reasons and functional needs. When infill walls are omitted in a particular storey, a soft storey is formed compared to much stiffer other stories. The masonry infill has bee...

A revised procedure for the design of steel plate shear walls is proposed. In this procedure, the thickness of the infill plate is found using equations that are derived from plastic analysis of the strip model, which is widely accepted for the representation of steel plate shear walls. Equations are derived from a basic steel plate shear wall configuration but are shown to be conservative for ...

Reinforced concrete frame buildings with Open Ground Story (OGS) are one of the most common building configurations in urban habitat. These configurations are known to be vulnerable to seismic excitations, primarily due to the sudden loss in strength in the ground story and differential stiffness distribution throughout the structure. The differential stiffness distribution is attributed primar...

Abstract: Masonry infill is considered as a non-structural element in all type of buildings where masonry use. But, masonry infill walls are mainly used to increase initial stiffness and strength of reinforced concrete (RC) frame buildings. This Open First storey is also termed as “Soft Storey”. The upper storeys have brick infilled wall panels with various opening percentage in it. In many cit...

Intra Infilled reinforced concrete (RC) frame (IF) is one of the most common types of structures used in low and medium rise building, especially in the area where affordable materials and labor are available, including in the area with high seismicity. Opening on the wall is part of the architectural design to house windows and doors of various sizes and location within the wall. Though openin...

This paper explores the different perspectives on infill development and its role in urban growth. Despite the intense debate about the potential for and effects of infill development, there is very little empirical evidence about whether policies to promote it have been effective, about the amount and type of infill development and its effect on surrounding communities. This paper first review...

an experimental study is conducted on three ½ scales, single-story, single-bay, frame specimens. the first specimen was a reinforced concrete frame with solid-brick infill. the second specimen was a reinforced concrete frame with hollow clay perforated-brick infill. the last specimen was a reinforced concrete frame without any infill. these three specimens were tested by pseudostatic method. di...