Experimental research was conducted to study the fire resistance of steel tubular columns used in prefabricated and modular construction. In order to achieve high-efficient prefabrication and fast on-site installation, membrane protections using board products and thermal insulation blankets are adopted as the favorable protection method. Three protected tubular columns were tested in a full-sc...

The major part of light weight timber constructions consists of insulation. Mineral wool is the most commonly used insulation due to its cost efficiency and easy handling. The fiber orientation and porosity of this insulation material enables flowthrough. The air flow resistance is low. If leakage occurs in the insulated bay section, the convective flow may cause energy losses and infiltration ...

Numerous studies have estimated the optimum thickness of thermal insulation materials used in building walls for different climate conditions. The economic parameters (inflation rate, discount rate, lifetime and energy costs), the heating/cooling loads of the building, the wall structure and the properties of the insulation material all affect the optimum insulation thickness. This study focuse...

Vacuum insulated panels (VIP) is an emerging technology that may constitute an alternative to rigid polyurethane (RPU) foam as insulation in refrigerators and freezers. The "skin effect" caused by the aluminum layer in the envelope complicates the evaluation of the global thermal resistance. This article present a new method of VIP characterization. Values of the global thermal resistance obtai...

This paper presents the application of model-based and data-driven approaches for prognostics and health management (PHM) of embedded planar capacitors under elevated temperature and voltage conditions. An embedded planar capacitor is a thin laminate that serves both as a power/ground plane and as a parallel plate capacitor in a multilayered printed wiring board (PWB). These capacitors are typi...

An assessment of uncertainties for the National Institute of Standards and Technology (NIST) 1016 mm Guarded-Hot-Plate apparatus is presented. The uncertainties are reported in a format consistent with current NIST policy on the expression of measurement uncertainty. The report describes a procedure for determination of component uncertainties for thermal conductivity and thermal resistance for...

In this paper, the properties of the physical and chemical materials, such as low loss amorphous HB1 core, high temperature resistance winding and insulation vegetable oil have been developed for use in liquid-immersed power transformer. The measured results of magnetic properties with different ferromagnetic materials core were obtained. Considering winding property for operation above 95°C co...

Cross-linked polyethylene (XLPE) is commonly used within high voltage cable insulation. It has improved thermal and mechanical resistance compared to normal low density polyethylene (LDPE). However, the cross-linking process may also vary the electrical characteristics of the material. This paper investigates changes in electrical properties of one type of LDPE before and after cross-linking. T...

Man-made mineral fibers are produced using inorganic materials and are widely used as thermal and acoustic insulation. These basically include continuous fiberglass filaments, glass wool (fiberglass insulation), stone wool, slag wool and refractory ceramic fibers. Likewise, in the last two decades nanoscale fibers have also been developed, among these being carbon nanotubes with their high elec...

In this study, ventilation of clothing microenvironment, thermal insulation and vapor resistance of two jackets made of different materials were measured locally at front, back, side and arm by using an articulated thermal manikin in a controlled climate chamber (29±1°C, 40±10%RH). The various conditions of microenvironment ventilation were created by making the manikin stand and walk, combined...