This paper describes an investigation of the influences of chlorine dioxide treatment on fibre surface lignin. The fibre surface characteristics and the interfacial behaviour of the sisal fibre/phenolic resin composites were also studied by SEM, AFM, and XPS. The results show that the surface of the untreated fibre contains a large amount of lignin with granular structure and non-granular struc...

The interfacial strength of secondary osteons from the diaphysis of the Thoroughbred equine third metacarpal was evaluated using the fiber pushout test. The pushout was performed on 300-500 microm sections of 4x4x15 mm bone blocks machined from four anatomic regions of the cortex. Pushout strength was evaluated from proximal to distal location within the diaphysis on four osteon types classifie...

The current study aims to investigate the effect of fillers with different geometries and sizes on the interfacial shear properties of PA6 composites with de-sized carbon fiber. The fillers which have been investigated are namely; nano-layer silicates (nanoclay), sub-micro aluminum titanium (ALTi) particles, and multiwall carbon nanotube (MWCNT). By means of X-ray photoelectron spectroscopy (XP...

A tensile mechanical test suitable to measure the adhesion between brittle coatings and ductile substrates was applied to measure the adhesion of painted layers on polypropylene blends. The test involves the tensile deformation of the painted assembly, resulting in the periodic cracking of the brittle coating on the ductile substrate. The interfacial shear strength was determined by measuring t...

0266-3538/$ see front matter 2009 Elsevier Ltd. A doi:10.1016/j.compscitech.2008.12.021 * Corresponding author. Tel.: +1 979 845 9409; fax E-mail address: [email protected] (D.C The interfacial shear strength of carbon nanotube coated carbon fibers in epoxy was studied using the single-fiber composite fragmentation test. The carbon fibers were coated with carbon nanotubes (CNT) on the ...

Strengthening of Resilon-filled roots via an adhesive interface should be reflected by improvement in the interfacial strength and dislocation resistance between the root fillings and intraradicular dentin. This study compared the interfacial strengths of Resilon/Epiphany and gutta-percha/AH Plus using a thin-slice push-out test design. Failure modes of root slices after push-out testing were e...

We have investigated the role of the penetration of saline on the shear strength of the cement-stem interface for stems inserted at room temperature and those preheated to 37 degrees C using a variety of commercial bone cements. Immersion in saline for two weeks at 37 degrees C reduced interfacial strength by 56% to 88% after insertion at room temperature and by 28% to 49% after preheating of t...

OBJECTIVES To assess the effect of interfacial surface roughness on the flexure strength and fracture mode and origin utilizing an in-vitro assessment of the clinical failure conditions expected for all-ceramic crowns and the connector area of fixed partial dentures (FPDs) using bilayered ceramic specimens tested in bi-axial flexure. METHODS Sets of 20 bilayered composite discs, with core:den...

Strength and toughness are two mechanical properties that are generally mutually exclusive but highly sought-after in the design of advanced composite materials. There has only been limited progress in achieving both high strength and toughness in composite materials. However, the fundamental underlying mechanics remain largely unexplored, especially at the nanoscale. Inspired by the lamellar s...