Incorporating superabsorbent polymer (SAP), which has the abilities of absorption and desorption in concrete can achieve the effect of internal curing. The influences of the volume, particle size and ways of entrained water of SAP on the workability, compressive strength, shrinkage, carbonation resistance and chloride penetration resistance of concrete were analyzed through the macroscopic and ...

Whole slide imaging (WSI) is a useful tool for multi-modal imaging, and in our work, we have often combined WSI with darkfield microscopy. However, traditional darkfield microscopy cannot use a single condenser to support high- and low-numerical-aperture objectives, which limits the modality of WSI. To overcome this limitation, we previously developed a darkfield internal reflection illuminatio...

Different types of curing compounds were applied to lab and field concrete at different times after casting. Two application methods, single and double layer applications, were employed. Concrete properties, such as electrical conductivity, moisture content, sorptivity, degree of hydration, strength, and permeability were evaluated, and the results were employed for assessment of the curing eff...

Heat generation in an exothermic reaction during the curing process and low thermal conductivity of the epoxy resin produces high peak temperature and temperature gradients which result in internal and residual stresses, especially in large epoxy samples. In this paper, an optimization algorithm was developed and applied to predict the thermal cure cycle to minimize the temperature peak and the...

The mechanical properties of the light-cured composite resins are related to the material composition, but also vary according to the light-source characteristics used for polymerization. In this study we followed the compressive strength variation for a light-cured composite resin according to the time of exposure to the curing light. With that end in view,18 test pieces were made from a light...

self-desiccation is the major source of autogenous shrinkage and crack formation in low water-binder ratio (w/b) concretes which can be reduced by internal curing. in this paper performance of high strength self consolidating concrete (hs-scc) with w/b of 0.28 and 0.33 including autogenous shrinkage, drying shrinkage, compressive strength, and resistance to freezing-thawing was investigated. th...

An active approach for initiating rigidization in carbon-fiber reinforced polymer (CFRP) composites unites electrical resistivity to mechanical stiffening. Temperature control is implemented in efforts to reduce the curing time of the composite and to increase control of the curing process. Specifically, proportional-integral (PI) feedback control of internal resistive (Joule) heating establish...

For many concretes and mortars, self-desiccation results in the creation of empty capillary porosity within the cement paste microstructure, accompanied by a decrease in achieved hydration, an increase in internal stresses, and an increased propensity for early age cracking. One solution to this problem for low water-to-cement ratio concretes where external curing is ineffective has been the de...