Abstract: The huge consumption of iron ores in China has attracted much attention to utilizing low grade complex iron resources, such as high-aluminum hematite-limonite ore, which is a refractory resource and difficult to upgrade by traditional physical concentration processes due to the superfine size and close dissemination of iron minerals with gangue minerals. An innovative technology for a...

In this study, the isothermal reduction of iron oxide pellets, made of Iranian Chadormalo, Gole-gohar, and Sangan iron ores, was investigated in the temperature range of 900-1100°C. Tabas, Pabdana, Babnizoo, Karmozd, and Shahrood domestic coals were used as reductants. Parametric studies were performed and the effects of such factors as temperature, average particle size of iron ore and coal fi...

In general terms, sintering describes the bonding of particles into a more coherent structure, where joins form between packed particles, usually as a result of heating. Characterization of sintering is an important topic in the fields of metallurgy, steel, iron ore pellets, ceramics, and snow for understanding material properties and material strength. Characterization using image analysis has...

The demands for increasing the efficiency and lowering the environmental effects in iron and steelmaking industries have given rise to interests in application of direct reduction (DR) processes for production of iron by different gases. These advancements require comprehensive models for better control of the process conditions and the product properties. In the present thesis fundamental aspe...

In this research, the effects of oxygen injection during the induration process were studied in order to improve the quality specifications and increase the rate of production of the iron oxide pellets. Several experiments were carried out in palletizing pilot plant in different conditions of oxygen injection. The results suggested that if only the extra oxygen was injected into the furnace in ...

In this study, the isothermal reduction of iron oxide pellets, made of Iranian Chadormalo, Gole-gohar, and Sangan iron ores, was investigated in the temperature range of 900-1100°C. Tabas, Pabdana, Babnizoo, Karmozd, and Shahrood domestic coals were used as reductants. Parametric studies were performed and the effects of such factors as temperature, average particle size of iron ore and coal fi...

The present study deals with the utilization of fines generated from comminution process (crushing, grinding and screening) of the Run of Mines into value added products i.e. fluxed iron ore pellets. The study comprises to understand the physical and mechanical behavior of five distinguished chemical compositions of green and dried iron ore pellets with respect to a typical Mini Blast furnace (...

in this research, the effects of oxygen injection during the induration process were studied in order to improve the quality specifications and increase the rate of production of the iron oxide pellets. several experiments were carried out in palletizing pilot plant in different conditions of oxygen injection. the results suggested that if only the extra oxygen was injected into the furnace in ...

A higher bustle temperature in midrex direct reduction process is always desirable due to its positive effect on the productivity and DRI quality. The limit of the bustle temperature is related to the sticking or clustering behaviour of oxide pellets during the reduction in the reactor. It has been well estabilished that coating of oxide pellets by a refractory material decreases its&#10tendenc...

A higher bustle temperature in midrex direct reduction process is always desirable due to its positive effect on the productivity and DRI quality. The limit of the bustle temperature is related to the sticking or clustering behaviour of oxide pellets during the reduction in the reactor. It has been well estabilished that coating of oxide pellets by a refractory material decreases its tendency ...