This paper presents the analysis of vibration control of a laminated composite beam that including magnetostrictive layers. The formulation of problem is presented based on the shear deformation beam theory. For vibration suppression, the velocity feedback control with constant gain distributed is considered. Navier's method is applied to analyze the solution of vibration suppression of laminat...

TiC-Ti-Al mixed powders and TC4 titanium alloy foils were overlapped layer-by-layer in the graphite die. The TC4-based laminated composite sheets reinforced by Ti aluminide and carbide were successfully fabricated via spark plasma sintering (SPS) at 1100 °C with a well-bonded interface. The composite layers were mainly composed of TiAl, Ti₃Al, Ti₂AlC, and Ti₃AlC₂ phases. The carbides particles ...

An analytical and numerical solution for the free vibration of laminated polymeric composite plates with different layups is studied in this paper. The governing equations of the laminated composite plates are derived from the classical laminated plate theory (CLPT) and the first-order shear deformation plate theory (FSDT). General layups are evaluated by the assumption of cross-ply and angle-p...

the effect of a distributed patch mass on the natural frequency of vibration of a laminated rectangular plate with simply supported boundaries is investigated. the third order displacement field of a composite laminated rectangular plate is defined using the two variable refined plate theory. equations of motion of the plate are obtained with the help of calculus of variation. parametric study ...

In this paper, a combination method has been developed by coupling Multi-Objective Genetic Algorithms (MOGA) and Finite Element Method (FEM). This method has been applied for determination of the optimal stacking sequence of laminated composite plate against buckling. The most important parameters in optimization of a laminated composite plate such as, angle, thickness, number, and material of ...

In this research, residual strength and stress concentration factor of laminated composites with a circular open hole are studied analytically, numerically and experimentally. The numerical study was carried out using the finite element method. Moreover an analytical study was carried out with developing of point stress criterion. Mechanical testing was performed to determine the un-notched ten...

When the electrically thin unit cell of a laminated composite material is made of two bianisotropic sheets whose constitutive properties in the thickness direction are decoupled from the constitutive properties in the interfacial planes, the laminated composite material can be homogenized into a material not all of whose constitutive parameters are independent of each other. This non-independen...

In this paper method of initial functions is used for the study of composite laminated beams. The distribution of bending and shear stresses in composite laminated beams are different from beams of small thickness. The equations of two dimensional elasticity have been used for deriving governing equations. The order of the derived equations depends on the stage at which the series representing ...

Aluminum lamination was performed to improve the physical and mechanical properties of several wood-based composite panels. The panels were aluminum-laminated on two faces in a hot press at 689 kPa and 120 °C for 6 min. Four types of wood-based composites were used as cores, and aluminum 3003 alloy sheets were used for face laminations. Polyurethane adhesive ensured bonding strength between the...

Free vibration and buckling responses of laminated composite plate in the framework of first order shear deformation theory is analysed. The model has been developed in ANSYS using ANSYS parametric design language code. The model has been developed in ANSYS using ANSYS parametric design language code. In this study two shell elements (SHELL181/SHELL281) have been chosen from the ANSYS element l...