As the demand for low-cost electronic systems increases, increasing wiring density/reducing printed circuit board (PCB) layer count becomes inevitable. This reality limits the PCB routing layer options of high-speed input/output (I/O) signals, making it more difficult to meet the next-generation product’s performance targets. For example, using densely wired microstrip routing on a PCB helps re...

The paper describes new concept o antenna for RFID technology. Antenna is locate lines to monitor tags situated on trains. Antenna w and it is fabricated by microstrip technology. Ant same mirrored parts having the same radiation p consists of three dielectric layers. The first laye radiation elements. The second layer is only construction and it sets optimal electromagnet radiating elements. T...

A novel ultra-wideband (UWB) bandpass filter (BPF) with notched band based on microstrip/slotline ring resonators is presented in this paper. The UWB BPF is fabricated with two microstrip ring resonators on the top copper layer and a slotline ring resonator on the bottom ground layer. Thus, an ultra-wide passband can be achieved owing to the coupling effects and microstrip/slotline transitions ...

We report the effect of a thick nitride layer on transmission loss in GaN-on-3C-SiC/low resistivity Si (LR-Si). Microstrip lines finite length and width with ground pads were fabricated three GaN-on-3C-SiC/LR-Si epitaxial structures varying thicknesses 3.2, 5.3, 8.0µm. The performance microstrip different substrates was evaluated frequency range 0.1 to 9GHz. sample 8.0µm showed minimal 0.3dB/mm...

An isolation enhanced dual polarized microstrip patch antenna has been designed for Sband Synthetic Aperture Radar. This antenna operates at 3.125 GHz with operating bandwidth of 150 MHz or 4.8%. The electromagnetic power is coupled from the feed line to radiating patch through proximity coupling feeding technique for better bandwidth achievement. A centre groundshorted microstrip line is creat...

We demonstrate a class of microstrip patch antennas that are stretchable, mechanically tunable, and reversibly deformable. The radiating element of the antenna consists of highly conductive and stretchable material with screen-printed silver nanowires embedded in the surface layer of an elastomeric substrate. A 3-GHz microstrip patch antenna and a 6-GHz 2-element patch array are fabricated. Rad...

The analysis and optimal design of a microstrip sensor for measuring the water content of rubber latex is described. The microstrip structure consists of one layer: substrate, protective layer and semi-infinite layer of wet medium. A functional relationship has been developed between the attenuation and the water content of the latex, and close agreement has been found between the computed and ...

In this paper, multi-channel capacitive sensor arrays based on microstrip band-stop filters are studied. The sensor arrays can be used to detect the proximity of objects at different positions and directions. Each capacitive sensing structure in the array is connected to an inductive element to form resonance at different frequencies. The resonances are designed to be isolated in the frequency ...

In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...